Science & Technology — Prelims· Prelims
Energy: Conventional and Alternative
Coal, oil and gas, sun, wind, water and waste, biofuels, hydrogen, batteries, and the atom: India's whole energy story for UPSC Prelims.
Energy is the chapter where the syllabus stops being abstract. Every light that comes on, every train that moves, every phone that charges, is a question about where the energy came from and what it cost. Prelims asks about it from three directions at once: the fuel itself, coal, oil, sun, wind, atom; the machine that converts it, the turbine, the cell, the reactor; and the number that measures it, the gigawatt, the calorific value, the blending percentage.
This chapter follows the fuel. It starts with the fuels that took millions of years to form and cannot be replaced, then moves to the ones that arrive every day, sun, wind, water, and waste, then to the newer conversions, biofuels, hydrogen, and batteries, and finally to the atom, which is both the oldest energy in the universe and the newest technology in the Indian grid. The physics of heat, the chemistry of combustion, and the ecology of what burning does to air, water, and soil are woven in as they arise, because the exam never asks about a fuel without asking about its smoke.
Keep the numbers close. Coal gives about 74 percent of India's electricity. Solar capacity grew 30-fold in nine years. Green hydrogen has a mission with an outlay of Rs 19,744 crore. Thorium is about 25 percent of the world's known reserves, and most of it sits in Indian beach sands. Those four facts alone have appeared in more questions than most whole chapters.
Non-Renewable (Conventional) Energy Resources
Non-renewable energy sources are those that cannot be replenished or take a very long time to form. They are finite and include fossil fuels like coal, petroleum, and natural gas, as well as other forms such as asphalt, bioasphalt, LPG (Liquefied Petroleum Gas), PNG (Piped Natural Gas), CNG (Compressed Natural Gas), LNG (Liquefied Natural Gas), and different types of natural gas like sweet and sour gas.
Coal
Coal is a solid fossil fuel formed from ancient plant matter over millions of years. It is primarily used for electricity generation and in industrial processes that require heat. It provides around 74 percent of the nation's electricity and roughly 55 percent of the country's energy need. Coal is one type of fossil fuel. It is as hard as stone and black in colour, and it is used as a fuel in both households and various industries.
About 300 million years ago, the Earth had dense forests in low-lying wetland areas. Due to natural processes like flooding, these forests got buried under the soil. As more soil deposited over them, they were compressed, and the temperature rose as they sank deeper and deeper. Under high pressure and high temperature, dead plants got slowly converted to coal. This slow process of conversion of dead vegetation into coal is called carbonisation.
Type of coal | Carbon content |
|---|---|
Anthracite | 86-97 percent (purest form) |
Bituminous | 69-86 percent |
Lignite | about 60-70 percent |
Peat | 50-60 percent (formed during first stage of coal formation) |
Coke | almost pure form of carbon |
Coke is a tough, porous and black substance, an almost pure form of carbon. It is used in the manufacture of steel and in the extraction of many metals. Coke is formed by heating coal in an oxygen-free atmosphere at high temperatures for a long time in a process called coking or destructive distillation. When heated in air, coal burns and produces mainly carbon dioxide gas. Coal is processed in industry to get some useful products such as coke, coal tar and coal gas. Coal tar is a black, thick liquid with an unpleasant smell, a mixture of about 200 substances, whose products are used for manufacturing synthetic dyes, explosives, plastics, and paints. These days, bitumen, a petroleum product, is used in place of coal tar for metalling roads. Coal gas is obtained during the processing of coal to get coke and is used as a fuel in many industries.
Fly ash is produced by the power plants using coal as fuel. Fly ash can be used in the production of bricks for building construction, and as a replacement for some of the Portland cement contents of concrete. Coal ash is the residue left after the combustion of coal in thermal power plants: fly ash is the fine particles carried with flue gases, and bottom ash is the heavier particles that settle at the furnace bottom. Its composition is silica, alumina, iron oxide, calcium oxide, and trace heavy metals. It is used in cement and brick manufacturing, road construction, land reclamation and mine filling, and agriculture as a soil conditioner under careful regulation. The concerns are air and water pollution, heavy metal contamination including arsenic, mercury and lead, ash pond failures, land degradation, and health issues from fine particulate matter. Flue gas desulphurisation does not just trap sulphur, it recycles pollution: in coal plants, wet FGD scrubbing reacts sulphur dioxide with limestone slurry, transforming a toxic gas into gypsum, a marketable material for cement and plaster, turning smoke into saleable stone.
Coal gas was used for street lighting for the first time in London in 1810 and in New York around 1820, and nowadays it is used as a source of heat rather than light. In India, the Petroleum Conservation Research Association (PCRA) advises people how to save petrol and diesel while driving.
Petroleum
Petroleum is a liquid fossil fuel formed from ancient marine organisms. It is mainly used for transportation fuels (gasoline, diesel) and electricity generation. Petroleum was formed from organisms living in the sea. As these organisms died, their bodies settled at the bottom of the sea and got covered with layers of sand and clay. Over millions of years, absence of air, high temperature and high pressure transformed the dead organisms into petroleum and natural gas. The word petroleum is derived from petra (rock) and oleum (oil), as it is mined from between the rocks under the Earth. Due to its great commercial importance, petroleum is also called black gold. The world's first oil well was drilled in Pennsylvania, USA, in 1859. Eight years later, in 1867, oil was struck at Makum in Assam in India. In India, oil is found in Assam, Gujarat, Mumbai High, and in the river basins of Godavari and Krishna.
Petroleum is a mixture of various constituents such as petroleum gas, petrol, diesel, lubricating oil, paraffin wax, and others. The process of separating the various constituents or fractions of petroleum is known as refining, carried out in a petroleum refinery. Fractional distillation is the process that separates crude oil into different petroleum products, such as gasoline, diesel, and kerosene. It works by heating crude oil to create vapours, which then rise up a fractionating column where they condense at different temperatures: gas at 20 degrees C, gasoline (petrol) at 150 degrees C, kerosene at 200 degrees C, diesel oil at 300 degrees C, fuel oil at 370 degrees C, and lubricating oil, paraffin wax and asphalt at 400 degrees C.
Constituent of petroleum | Uses |
|---|---|
Petroleum gas in liquid form (LPG) | Fuel for home and industry |
Petrol | Motor fuel, aviation fuel, solvent for dry cleaning |
Kerosene | Fuel for stoves, lamps, and for jet aircraft |
Diesel | Fuel for heavy motor vehicles, electric generators |
Lubricating oil | Lubrication |
Paraffin wax | Ointments, candles, vaseline, etc. |
Bitumen | Paints, road surfacing |
LPG (Liquefied Petroleum Gas) is a flammable mixture of hydrocarbon gases, primarily made up of propane, butane, and isobutane. LPG smells due to the addition of ethyl mercaptan, a chemical with a strong odour, to make it easier to detect leaks. CNG (Compressed Natural Gas) is methane stored under high pressure, used as a cleaner alternative to gasoline and diesel in vehicles. In the oil and gas industry, sweet gas and sour gas refer to the levels of hydrogen sulphide (H2S) present in the natural gas: the presence of hydrogen sulphide makes the gas sour, while its absence or very low concentration makes it sweet. Natural gas is also an important fossil fuel. It is easy to transport through pipes, it is a cleaner fuel, it can be used directly for burning in homes and factories, it is used as a starting material for the manufacture of several chemicals and fertilisers, and it is stored under high pressure as CNG for power generation. India has vast reserves of natural gas, found in Tripura, Rajasthan, Maharashtra, and in the Krishna Godavari delta, and a network of gas supply pipelines exists in Vadodara in Gujarat, some parts of Delhi, and other places. Many useful substances obtained from petroleum and natural gas are termed petrochemicals, used in the manufacture of detergents, fibres such as polyester, nylon and acrylic, polythene and other man-made plastics. Hydrogen gas obtained from natural gas is used in the production of fertilisers such as urea.
Calorific value of fuels
Calorific value is a measure of the amount of heat produced by a unit mass or volume of a substance when it undergoes complete combustion. It is often expressed in units like kilojoules per kilogram (kJ/kg) or British thermal units per pound (BTU/lb). The amount of heat energy produced on complete combustion of 1 kg of a fuel is called its calorific value, and a good fuel is cheap, readily available, easy to transport, produces a large amount of heat, burns easily in air at a moderate rate, and does not leave behind undesirable substances.
Fuel | Calorific value (kJ/kg) | Fuel | Calorific value (kJ/kg) | Fuel | Calorific value (kJ/kg) |
|---|---|---|---|---|---|
Cow dung | 8000 | Petrol | 45000 | Biogas | 40000 |
Kerosene | 45000 | Coal | 33000 | LPG | 55000 |
Wood | 22000 | Methane | 50000 | Diesel | 45000 |
The physics of burning is the physics of heat. Combustion is a chemical process in which a substance reacts with oxygen to give off heat, and the substance that undergoes combustion is combustible. Oxygen is essential for combustion, and the lowest temperature at which a substance catches fire is called its ignition temperature. Substances such as petrol and alcohol have very low ignition temperatures and are called inflammable substances. Fire needs three things, fuel, air to supply oxygen, and heat to raise the temperature of the fuel beyond the ignition temperature, and fire can be controlled by removing one or more of them. Water cools the combustible material below its ignition temperature and its vapours cut off the supply of air, but for fires involving electrical equipment and inflammable materials like petrol, carbon dioxide is the best extinguisher, because it forms a blanket around the fire and brings down the fuel temperature. There are three types of combustion: rapid combustion, in which material burns rapidly and produces heat and light; spontaneous combustion, in which material suddenly bursts into flames without any apparent cause, as phosphorus does in air at room temperature, and spontaneous combustion of coal dust has caused many disastrous fires in coal mines; and explosion, when a material is ignited and a sudden reaction takes place with the evolution of heat, light, and sound. A flame is the visible, gaseous part of a fire, and the substances which vaporise during burning give flames, such as kerosene oil and molten wax. There are three zones of a flame: the dark zone, the luminous zone, and the non-luminous zone.
Heat itself moves in three ways. Conduction transfers heat through a solid without movement of the material, by molecular collisions, and is best in metals such as aluminium, iron, and copper. Convection transfers heat through fluid movement in liquids or gases, forming convection currents, and explains boiling water, sea and land breezes, monsoons, cyclones, and ocean currents. Radiation transfers heat via electromagnetic waves without any medium, travels at the speed of light, needs no medium, and is how the Sun's heat reaches us and how the greenhouse effect works. Dark surfaces absorb more heat, so dark-coloured clothes are more comfortable in winter, while light-coloured clothes reflect most of the heat and are more comfortable in summer. Wool is a poor conductor of heat: air gets trapped between the wool fibres and prevents the flow of heat from the body to the cold surroundings, which is why a new quilt is warmer than an old one, because it has more air trapped within its fibres.
Mode | Definition | Key features | Examples | Applications |
|---|---|---|---|---|
Conduction | Heat transfers through a solid without movement of the material itself | Requires a medium (solid); occurs via molecular collisions; best in metals | Hot metal rod; cooking pan getting hot | Thermal insulation, cookware, building design; explains Urban Heat Island effect |
Convection | Heat transfer through fluid movement (liquids or gases) | Requires a fluid medium; involves bulk movement; forms convection currents | Boiling water; sea/land breeze; airflow | Explains monsoons, cyclones, and ocean currents; applied in radiators and geothermal systems |
Radiation | Heat transfer via electromagnetic waves without any medium | Occurs in vacuum; travels at speed of light; emitted by all hot bodies; related to infrared energy | Sun's heat; infrared heaters; fire warmth | Key to solar energy, greenhouse effect, space tech; used in thermal imaging and radiative balance models |
Burning has a price. Unburnt carbon particles in air are dangerous pollutants causing respiratory problems. Incomplete combustion of a fuel gives poisonous carbon monoxide gas. Oxides of sulphur and nitrogen produced by the burning of coal, diesel and petrol cause acid rain, which is harmful for crops, buildings, and soil. Combustion of most fuels releases carbon dioxide, and the increased percentage of carbon dioxide in the air has been linked to global warming, which results in the melting of polar glaciers, a rise in sea level, floods in coastal areas, and the submergence of low-lying coastal areas. The use of diesel and petrol as fuels in automobiles is being replaced by CNG, because CNG produces the harmful products in very small amounts and is thus a cleaner fuel.
Two small facts from the same physics round out combustion. In the Sun, heat and light are produced by nuclear reactions. More than five thousand years ago, small pieces of pinewood dipped in sulphur were used as matches in ancient Egypt, and the modern safety match was developed only about two hundred years ago: the head of the safety match contains antimony trisulphide and potassium chlorate, and the rubbing surface has powdered glass and a little red phosphorus, less dangerous than white phosphorus, so that when the match is struck, some red phosphorus gets converted into white phosphorus.
Forest fires are the uncontrolled burning of trees and vegetation in forests, also known as wildfires, and they vary in scale, frequency, and intensity. Surface fires burn the forest floor including grass and shrubs, crown fires spread from treetop to treetop, and ground fires burn organic matter below the forest floor. Natural causes are lightning and high temperatures and droughts, while human causes are slash-and-burn agriculture, careless disposal of cigarettes and campfires, clearing land for construction and roads, and poaching and illegal activities. Their impacts are biodiversity loss, soil erosion and degradation, increased carbon dioxide emissions, disruption of the water cycle, displacement of communities, damage to infrastructure, loss of forest-based livelihoods, and health issues due to smoke. Over 35,000 forest fire alerts were recorded in 2023 via MODIS and SNPP satellites, with highly affected states being Odisha, Chhattisgarh, Madhya Pradesh, and Maharashtra, and the north-east seeing seasonal fires linked to shifting cultivation (jhum). Prevention and mitigation use early warning systems such as the Forest Fire Alert System (FIRE) by the Forest Survey of India, satellite monitoring through MODIS, VIIRS, and BHUVAN (ISRO), community-based forest protection through Van Suraksha Samitis, fire lines and fire breaks, and capacity building and awareness.
Renewable (Non-Conventional) Energy Resources
Renewable energy sources are diverse and sustainable. They are not finite resources such as coal or petroleum. Its forms include solar, wind, geothermal, hydropower, and ocean energy (including Ocean Thermal Energy Conversion (OTEC) and tidal energy), biomass energy (biofuels), and wave energy. Each of these sources has distinct characteristics and types.
Source | Installed capacity (GW) |
|---|---|
Solar power | 116.24 |
Wind power | 51.67 |
Hydro | 49.62 |
Bio power | 11.59 |
Nuclear | 8.78 |
Small hydro power | 5.10 |
Solar energy
Solar energy is the harnessing of the sun's energy and converting it into electricity or heat. Photovoltaic (PV) systems convert sunlight directly into electricity using solar cells, and are widely used for both residential and commercial purposes. In PV systems, photovoltaic cells, typically made of semiconductor materials like silicon, absorb sunlight. This sunlight dislodges electrons in the semiconductor material, creating a flow of electric current. This process is known as the photovoltaic effect. Concentrated Solar Power (CSP) uses mirrors or lenses to concentrate a large area of sunlight onto a small area, generating heat that drives an engine connected to an electrical power generator. The difference between the two matters for the exam: solar PV panels convert sunlight directly into electricity using photovoltaic cells, primarily for electricity generation in residential and commercial settings, while solar thermal panels absorb sunlight to heat a fluid, which is then used for heating purposes such as domestic hot water and space heating.
A solar water pump is an electrical pump system that uses one or more photovoltaic panels to generate power. Submersible pumps, surface pumps, direct current (DC) pumps, and alternative current (AC) pumps are the four main categories of solar water pumps, and centrifugal and piston pumps can both be driven by solar power. Solar rooftop systems are installed on the rooftops of residential or commercial buildings. These systems generate electricity for onsite use and can feed excess power back to the grid. Solar parks are large-scale solar installations, often developed in collaboration with state governments or big private firms. India aims for 500 GW of renewable energy installed capacity by 2030. As of October 2024, India's installed solar capacity stands at approximately 94.17 GW (MNRE), having increased 30-fold over the past nine years.
Rank | State | Solar capacity | Prominent solar plant |
|---|---|---|---|
1 | Rajasthan | 23 GW | Bhadla Solar Park |
2 | Gujarat | 10.13 GW | Charanka Solar Park |
3 | Karnataka | 9.05 GW | Pavagada Solar Park |
4 | Tamil Nadu | 8.1 GW | Kamuthi Solar Power Project |
5 | Maharashtra | 4.8 GW | Sakri Solar Power Plant |
The International Solar Alliance (ISA) was launched by India in 2015 to promote solar energy globally, particularly in sunshine-rich countries. It is headquartered in Gurugram, India, and is a joint initiative with France. It was conceptualised on the sidelines of the 21st Conference of Parties (COP21) to the UNFCCC in Paris in 2015.
Wind energy
Wind energy involves generating electricity by converting the kinetic energy of wind using wind turbines. As on August 2025, India's installed wind capacity stands at 51.67 GW. Major wind energy installations are found in states like Tamil Nadu, Gujarat, Maharashtra, and Karnataka, which have favourable wind conditions. India has developed several large wind parks, including Jaisalmer Wind Park (1,064 MW) and Muppandal Wind Farm (1,500 MW). Battery energy storage systems let electricity travel in time: they absorb surplus solar and wind power when it is wasted, then release it hours later when demand peaks, turning intermittent renewables into round-the-clock power.
Geothermal energy
Geothermal energy is derived from the natural heat of the Earth, typically from areas with volcanic or tectonic activity. As of 2024, India has not yet started commercial power production from geothermal energy, though the potential is significant. Site exploration is currently going on in Puga Valley of Ladakh, and India is also exploring sites in Arunachal Pradesh. Estimates suggest that India has the capacity to generate around 10.6 GW of geothermal energy. The National Geothermal Energy Policy 2025 aims to unlock 10,600 MW of potential, enhance energy security, and provide reliable base-load power; encourage joint ventures between geothermal developers, oil companies, and mineral firms; offer fiscal incentives such as tax holidays, accelerated depreciation, import duty exemptions, concessional land leases, viability gap funding, and green bonds; allow up to 100 percent FDI in geothermal; and support geothermal projects for 30 years, with extensions based on resource availability.
Hydropower
Hydropower uses the energy of flowing water, typically from rivers or streams, to generate electricity. It is a renewable and clean source of energy, though large dams can have significant environmental and social impacts. As on 10 October 2024, hydroelectric capacity stands at 51.99 GW, with large hydro projects generating 46.92 GW and small hydro power adding 5.07 GW. Pumped-storage hydropower is a method of storing energy by using two water reservoirs at different elevations. During periods of low electricity demand, excess energy is used to pump water from the lower reservoir to the upper one. When energy demand increases, the stored water is released back down to the lower reservoir, passing through turbines to generate electricity. Unlike batteries that may have limited capacity or duration, pumped-storage hydropower can store large amounts of energy over long periods, supporting seasonal energy management.
Ocean energy
Ocean energy encompasses various methods of harnessing energy from the ocean, including thermal gradients, tides, currents and waves. Ocean thermal energy conversion (OTEC) is a process for producing energy by harnessing the temperature differences (thermal gradients) between ocean surface waters and deep ocean waters. As of 2024, India has not yet realised significant commercial capacity in ocean energy, but India is estimated to have a theoretical potential of about 54 GW of ocean energy, including tidal and wave energy. The Gulf of Kutch and the Gulf of Cambay are identified as potential sites for tidal energy, and the long coastline of India offers numerous locations for wave energy and OTEC.
Gas hydrates are crystalline, ice-like compounds composed of water molecules that trap gas molecules within their structure. They form under specific conditions of low temperature and high pressure, typically in deep-sea sediments and permafrost regions. The most common gas hydrates contain methane, but other gases like ethane, propane, and carbon dioxide can also be present. Gas hydrates form when water molecules create a cage-like structure around gas molecules under low temperatures and high pressures, conditions often found in deep-sea sediments and permafrost regions. They are found in marine sediments along continental margins and permafrost regions, mostly in deep-sea environments. Methane hydrates are of interest as a potential future energy resource: the methane trapped within hydrates is abundant, and some estimates suggest it could represent a vast reservoir of natural gas.
Biomass energy (biofuels)
Biomass energy involves using organic materials as fuel to produce electricity, heat, or transportation fuels. These materials include wood, agricultural residues, and other plant-based materials. Biomass is considered renewable because it can be replenished over a relatively short period of time, unlike fossil fuels. Its conversion processes are direct combustion, burning biomass to produce heat which is then used to generate electricity; anaerobic digestion, using microorganisms to break down organic matter in the absence of oxygen, producing biogas; fermentation, converting biomass into ethanol; and gasification and pyrolysis, transforming biomass into synthetic gas or bio-oil at high temperatures. Biomass can be a sustainable energy source when managed responsibly, though it does produce some emissions when burned.
The types of biomass energy systems in India are biomass power plants, which use organic materials like agricultural residues, wood, and bagasse to produce electricity; biomass cogeneration, the simultaneous production of electricity and heat using biomass, commonly practised in sugar mills; waste-to-energy plants, which convert municipal and industrial waste into energy; biomass gasification, where biomass is converted into a gas (syngas) for power generation or as a fuel, using coconut shells, groundnut shells and rice husk; and biofuels, biomass processed into ethanol and biodiesel as substitutes for gasoline and diesel in vehicles. Currently, biopower, including biomass and biogas energy, adds 11.32 GW to the renewable energy mix. Biomass energy facilities are widely distributed across India, with a higher concentration in agricultural states like Punjab, Haryana, and Uttar Pradesh. Many sugar mills in India have adopted biomass cogeneration, and there are numerous waste-to-energy projects in urban areas. The United States is the world's largest producer of ethanol, contributing about 52 percent of global output, followed by Brazil with around 28 percent. In 2024, ethanol production in the US stood at approximately 16,219 million gallons, while Brazil produced about 8,780 million gallons. Brazil was the leading ethanol producer until 2005, but the United States has consistently remained ahead since then. In the US, ethanol is primarily produced from corn, whereas in Brazil, sugarcane serves as the main feedstock.
Waste to power energy
Waste-to-power energy, also known as Waste-to-Energy (WtE) or Energy-from-Waste (EfW), is a process that converts waste materials into electricity, heat, or fuel through various treatment methods. This approach not only helps in managing waste but also contributes to energy production, thereby addressing two significant environmental challenges. The primary methods include thermal technologies like incineration, pyrolysis, and gasification, as well as non-thermal technologies such as anaerobic digestion and fermentation. Incineration is the process of burning waste materials at high temperatures to reduce their volume, generating ash, flue gas, and heat, often used for energy production. Pyrolysis is the thermal decomposition of organic materials at high temperatures in the absence of oxygen, producing char, liquid bio-oil, and syngas. Gasification converts organic or fossil-based materials into syngas, a mixture of carbon monoxide, hydrogen, and carbon dioxide, by reacting them at high temperatures with a controlled amount of oxygen and/or steam. Anaerobic digestion breaks down organic waste in the absence of oxygen, producing biogas, mainly methane and carbon dioxide, which can be used to generate electricity and heat. The choice depends on air supply: no air means pyrolysis, partial air means gasification, and excess air means incineration.
Polycrack technology is an innovative approach in waste management and energy production, converting various types of waste into usable forms of energy. It uses a heterogeneous catalytic process, which allows the conversion of multiple feedstocks, including plastic, rubber, and organic waste, into hydrocarbon liquid fuels, gas, carbon, and water. Its output products are hydrocarbon liquid fuels that can substitute for fossil fuels, gas for heating or electricity generation, carbon with industrial applications, and water. By converting waste into energy, it significantly reduces the amount of waste that ends up in landfills and minimises the release of greenhouse gases compared to traditional waste disposal methods. It is used for municipal solid waste, plastic waste, and industrial waste, for fuel production, and for energy recovery.
The wider waste story matters here. A landfill is a low-lying open area used for the disposal of waste materials, with useful and non-useful components segregated before disposal. Waste segregation at source uses coloured dustbins: the blue bin is for reusable materials such as plastics, metals, and glass, and the green bin is for kitchen and other plant or animal waste. Composting is the rotting and conversion of waste materials into manure, and vermi-composting prepares compost with the help of redworms, which have a gizzard that grinds their food and do not survive in extreme climates. Plastics cannot be converted into less harmful substances by composting, so there is a need to minimise the overuse of plastics. Wastewater, the dirty black-brown water that goes down the drains from sinks, showers, toilets, and laundries, is cleaned in sewage treatment plants through physical, chemical, and biological processes. Its by-products are sludge, which is dried and used as manure, and biogas, which can be used as fuel or to produce electricity.
Some Recent and Advanced Energy Generation Sources
Biofuel
Biofuels are a type of renewable energy that comes from living materials. They are considered renewable because the feedstock material can be replenished easily. Biofuels, particularly ethanol and methanol, are increasingly recognised as sustainable alternatives to conventional fossil fuels, and their blending with petrol is a significant step towards reducing emissions and dependency on oil imports.
Generation | Key characteristics |
|---|---|
1st generation | Derived from consumable food items (starch, sugar, vegetable oil). Known as conventional biofuels (e.g., ethanol from sugarcane). Examples: biogas, biodiesel, bioalcohols. |
2nd generation | Derived from sustainable non-food feedstocks (waste vegetable oil, forest residue). Also known as olive green or cellulosic-ethanol fuel. |
3rd generation | Derived from algae. Also known as algae fuel or oilage. Produces various biofuels (biodiesel, butanol, propanol, ethanol) with high yields. |
4th generation | Produced using genetically engineered organisms and feedstocks. Main organisms: genetically modified algae and cyanobacteria. |
Ethanol blending in petrol: ethanol, a type of alcohol, is typically produced through the fermentation of sugars found in crops like sugarcane, corn, and beet. Ethanol is blended with petrol to create E10 (10 percent ethanol and 90 percent petrol), E15, or even E85 (85 percent ethanol) blends, depending on the country and regulations. Ethanol blending reduces greenhouse gas emissions, as ethanol burns cleaner than gasoline, helps in diversifying energy sources, and supports agricultural sectors. High ethanol blends may require modifications to traditional petrol engines and fuel infrastructure, and there is a debate over the food versus fuel issue, concerning the use of food crops for fuel production. Methanol blending in petrol: methanol, also known as wood alcohol, can be produced from natural gas, coal, or biomass. Methanol is blended with petrol in various proportions, commonly as M5 (5 percent methanol and 95 percent petrol) or M15 blends. Methanol blending reduces carbon emissions, is cost-effective compared to pure petrol, and offers higher octane ratings, improving engine performance. Similar to ethanol, methanol can be corrosive and may require engine and infrastructure adjustments, and it has toxicity concerns if mishandled.
Biofuel | Source | Production method | Composition | Advantages |
|---|---|---|---|---|
Bioethanol | Corn, sugarcane | Fermentation | Primarily ethanol (C2H5OH) | Higher energy content than petrol, reduces emissions |
Biodiesel | Vegetable oils, animal fats | Transesterification | Fatty acid methyl esters (FAME) | Less harmful emissions, alternative to conventional diesel |
Biogas | Organic waste (manure, food waste) | Anaerobic digestion | Mainly methane (CH4) and carbon dioxide (CO2) | Reduces greenhouse gas emissions from waste |
Biobutanol | Starch | Fermentation | Butanol (C4H10O) | Highest energy content among gasoline alternatives, reduces emissions, used as a solvent |
Biohydrogen | Organic matter | Pyrolysis, gasification, biological fermentation | Hydrogen (H2) | Perfect alternative to fossil fuel |
Maize is a quiet multi-tasker in this story: it can be used for the production of starch, oil extracted from maize can be a feedstock for biodiesel, and alcoholic beverages can be produced by using maize. Renewable fuels are derived from naturally replenishable resources like plants, animal waste, and other biological materials, and include biofuels such as ethanol and biodiesel, biogas (methane from organic waste), green hydrogen produced via electrolysis using renewable electricity, and algae-based fuels such as jet fuel substitutes and biodiesel. They reduce greenhouse gas emissions, promote energy security by reducing fossil fuel dependence, encourage rural employment especially in biofuel production, and are biodegradable and relatively safer to store and transport. Their challenges are competition with food crops such as sugarcane for ethanol, lower energy density than fossil fuels, high initial infrastructure and research costs, and seasonal variability in feedstock supply. Indian initiatives include the PM-JI-VAN Yojana, which promotes ethanol from agricultural waste; the National Bio-Energy Mission, which boosts biomass and biogas usage; the Ethanol Blending Programme, targeting 20 percent ethanol in petrol (E20) by 2025; and the SATAT scheme, Sustainable Alternative Towards Affordable Transportation, which promotes Compressed Biogas (CBG).
Flex-fuel vehicles
Flex-fuel vehicles (FFVs) are specially designed to operate on various fuel types, including blends of gasoline and biofuels like ethanol or methanol, and can even run entirely on these biofuels. FFV engines resemble those of conventional vehicles but include modified components to handle different fuel blends, especially high ethanol or methanol content. They can use E85 (85 percent ethanol, 15 percent gasoline) and other blends like E15; some operate on M85 (85 percent methanol, 15 percent gasoline) and other methanol blends; and they can switch to 100 percent gasoline, providing versatility where biofuel blends are less accessible. They have advanced fuel systems with sophisticated fuel injection and engine management systems that detect the fuel blend and adjust combustion processes, and durable, corrosion-resistant materials that ensure longevity with high biofuel blends. A built-in fuel composition (ethanol) sensor reads the exact ethanol-petrol mix in real time and feeds it to the ECU, which instantly recalibrates ignition and injection to run smoothly on any blend.
Fuel properties
Octane number measures a fuel's resistance to engine knocking. Higher octane numbers indicate better resistance to premature combustion in gasoline.
Cetane number indicates the ignition quality of diesel fuel. A higher cetane number signifies easier ignition.
Flash point is the lowest temperature at which a substance produces enough vapour to ignite momentarily.
Engine knocking, also known as detonation, is an undesirable sound and phenomenon that occurs when the air-fuel mixture in the combustion chamber ignites prematurely or unevenly.
The compound used to increase the octane rating of gasoline is tetraethyllead. The compound known as cetane is also known as hexadecane.
National Policy on Biofuels, 2018
Ethanol blending: target 20 percent ethanol blending in petrol by 2030 and 10 percent by 2022.
Biodiesel production: aim to utilise 100 percent of used cooking oil for biodiesel by 2023, with a focus on producing biodiesel from non-edible oils.
Advanced biofuels: promote development of second-generation (lignocellulosic) and third-generation (algal) biofuels.
Investment and production capacity: increase biofuel production capacity with incentives for establishing plants in rural areas.
Sustainability criteria: set a minimum land use target of 5 percent of total cultivable area for biofuel crops.
Financial incentives: introduce financial incentives to boost biofuel production and blending.
Hydrogen fuel
Hydrogen is a clean energy source crucial for a sustainable, low-carbon future. It can be classified into three main types. Grey hydrogen is produced via steam methane reforming (SMR) using fossil fuels like natural gas: CH4 + H2O gives CO + 3H2, at high temperatures typically between 700 degrees C and 1,000 degrees C, accompanied by the water-gas shift reaction, CO + H2O gives CO2 + H2. It releases carbon dioxide, making it less eco-friendly. Blue hydrogen is also produced through SMR with fossil fuels, but employs carbon capture and storage (CCS) to mitigate emissions, reducing the carbon footprint compared to grey hydrogen. CCS technology captures and stores CO2 emissions from fossil fuel processes, helping combat climate change. Green hydrogen is created through electrolysis using renewable energy sources (solar, wind, hydropower) to split water into hydrogen and oxygen. It is the most environmentally friendly, as it emits no CO2. It can be used directly as a fuel for internal combustion, blended with natural gas and used as fuel for heat or power generation, and used in the hydrogen fuel cell to run vehicles.
The National Green Hydrogen Mission was approved on 4 January 2023, with an outlay of Rs 19,744 crore for FY 2023-30. The mission aims to position India as a global hub for green hydrogen production and export. Its key components are demand creation, focusing on exports and domestic use; the SIGHT programme, incentives for electrolyser manufacturing and green hydrogen production; pilot projects in steel, mobility, and shipping; infrastructure development, establishing green hydrogen hubs and regulatory frameworks; and research, development and skill development. Expected outcomes by 2030 are green hydrogen production capacity of 5 MMT per annum, significantly reducing fossil fuel imports and averting 50 MMT of CO2 emissions. For the wider hydrogen story, including the colours of hydrogen and the fuel cell itself, see the alternative energy and hydrogen coverage.
Battery technology
Batteries convert chemical energy into electrical energy through electrochemical reactions. They consist of two electrodes, anode and cathode, separated by an electrolyte. On charging, electrical energy drives ions from the cathode to the anode; on discharging, ions move back to the cathode, generating current. In a lithium-ion battery, discharge is LiCoO2 + C giving LixCoO2 + C, and charge is LixCoO2 + CxLi giving LiCoO2 + C.
The diagram above shows how a fuel cell works, and it is the heart of the hydrogen story. Fuel cells convert chemical energy directly into electrical energy, typically using hydrogen. At the anode, fuel oxidises, releasing electrons; at the cathode, electrons combine with protons and oxidant to produce water. In a hydrogen fuel cell, the anode reaction is 2H2 giving 4H+ + 4e-, and the cathode reaction is O2 + 4H+ + 4e- giving 2H2O. A hydrogen fuel cell vehicle emits only water vapour from its exhaust pipe. Fuel cells are used in transportation, including heavy-duty and long-range transport; stationary power generation for buildings; portable power for devices in off-grid areas; and integration with renewable energy, balancing energy supply from sources like wind and solar. Microbial fuel cells (MFCs) convert chemical energy to electrical energy using microorganisms: bacteria oxidise organic compounds at the anode, releasing electrons that generate electricity, while protons combine with oxygen at the cathode to form water. They are used in wastewater treatment, degrading pollutants while generating electricity; as biosensors that detect pollutants in water; as remote power sources for low-power devices in remote locations; and as a research tool for studying microbial interactions and metabolism.
Advanced Chemistry Cells (ACCs), or advanced chemistry cell batteries, are crucial for lithium-ion batteries and energy storage systems. They store electric energy through advanced chemical processes, allowing efficient conversion back to electrical energy. ACCs reduce fossil fuel reliance and help combat global warming, supporting clean energy technologies. India recognises their importance: the National Programme on Advanced Chemistry Cell (ACC) Battery Storage aims to decrease import dependency, and a Production-Linked Incentive (PLI) scheme encourages domestic manufacturing. Sodium-ion batteries are a promising alternative to lithium-ion batteries. They operate similarly, with sodium ions moving between the electrodes during charging and discharging. Their anode is typically made from hard carbons, the cathode from layered oxides or polyanionic compounds, and the electrolyte is a sodium salt in an organic solvent.
Lithium-ion batteries have transformed energy storage, known for high energy density and long lifespan. Lithium ions move between the anode and cathode during charging, from cathode to anode, and discharging, back to cathode. The anode is usually graphite, the cathode is lithium metal oxides, the electrolyte is a lithium salt in an organic solvent, and the separator is a porous membrane for ion transfer. In electric vehicle lithium-ion batteries, cobalt, lithium, and nickel form cathodes, determining energy density, lifespan, cost, and performance. Graphite is used exclusively in anodes, not cathodes. Electrolytes enable lithium ion movement, while separators prevent short circuits while allowing ion flow. India ranks among the top 10 countries for lithium resources, with significant discoveries, including 5.9 million metric tonnes in Jammu and Kashmir. The world's lithium lies in South America's deserts: the Lithium Triangle controls about 60 percent of accessible reserves, but China dominates the bottleneck, controlling more than 70 percent of lithium refining and lithium-ion cell manufacturing. Gravity batteries utilise gravitational potential energy for electricity storage and release: they elevate heavy masses during excess energy generation and lower them to generate electricity when needed, using cranes or elevators to raise the mass and capture potential energy.
Nuclear Science and Technology
Structure of atom
Atoms are made up of three types of subatomic particles: protons, neutrons, and electrons. The protons and neutrons are located in the nucleus at the centre of the atom, while the electrons orbit around the nucleus in shells or energy levels.
Particle | Location | Charge | Mass (amu) | Function |
|---|---|---|---|---|
Proton | Nucleus | Positive (+) | 1 | Determines the atomic number and element |
Neutron | Nucleus | Neutral (0) | 1 | Contributes to the atomic mass; difference in neutrons with same number of protons leads to isotopes of the same element |
Electron | Orbits the nucleus in shells | Negative (-) | 0.0005 | Determines the chemical behaviour, forms bonds |
Standard Model of particle physics
The Standard Model is a theory that explains the fundamental particles that make up the universe and how they interact through forces. It categorises these particles into two main groups: matter particles and force carriers. Matter particles (fermions) are the building blocks of everything around us. Quarks come in six varieties, known as flavours: Up (u), Down (d), Charm (c), Strange (s), Top (t), and Bottom (b), and they combine to form protons and neutrons. Leptons include the electron, muon, tau, and their corresponding neutrinos, and electrons are the leptons that orbit the nucleus and are essential for chemical reactions. Force carriers (bosons) mediate the fundamental forces. Gauge bosons are the photon, which carries the electromagnetic force responsible for electricity, magnetism, and light; the W and Z bosons, which mediate the weak nuclear force involved in processes like radioactive decay; and gluons, responsible for the strong nuclear force that holds protons and neutrons together. The Higgs boson is a special particle that gives mass to other particles through the Higgs mechanism, and it was discovered in 2012. The Standard Model describes three of the four fundamental forces: the electromagnetic force, the weak nuclear force, and the strong nuclear force. The gravitational force is not included in the Standard Model; it is described by a different theory, General Relativity.
Electron, proton, neutron and muon are all classified as subatomic particles.
Nuclear energy
Nuclear energy is the energy released during nuclear reactions, particularly through fission and fusion. Nuclear fission is the process of splitting a heavy atomic nucleus into two or more lighter nuclei, accompanied by the release of a large amount of energy. The neutrons produced during fission can trigger subsequent fission reactions in nearby fissile nuclei, creating a self-sustaining chain reaction, which is the basis for energy production in nuclear power plants. Nuclear fusion is the process of combining two light atomic nuclei to form a heavier nucleus, releasing a large amount of energy. Common fusion fuels include isotopes of hydrogen, such as deuterium and tritium. Experimental projects like ITER (International Thermonuclear Experimental Reactor) aim to develop practical and controlled nuclear fusion for energy production.
ITER is the most advanced and the world's largest Tokamak, a major international research project focused on nuclear fusion. It represents a collaborative effort involving 35 countries, including the European Union, the United States, Russia, China, India, Japan, and South Korea. ITER is often referred to as the Artificial Sun Experiment because it aims to replicate the conditions and processes that occur in the sun to generate energy on Earth. It uses the tokamak concept, a magnetic confinement fusion approach: heating and containing plasma, a superheated state of matter, using powerful magnetic fields, to initiate and sustain fusion reactions between deuterium and tritium isotopes, releasing significant energy. Cold fusion is a type of nuclear reaction thought to take place at or near room temperature, in sharp contrast to the hot fusion that occurs naturally in stars and artificially in hydrogen bombs and prototype fusion reactors under great pressure at temperatures of millions of degrees. There is currently no accepted theoretical model that would allow cold fusion to occur.
Nuclear reactor
A nuclear reactor is a complex system designed to initiate and control nuclear fission reactions for generating electricity or heat. The core principle is the controlled splitting of atomic nuclei, which releases a significant amount of energy. Its components are fuel, typically Uranium-235, a fissile material that undergoes nuclear fission; control rods, made from neutron-absorbing materials such as boron and cadmium, which regulate the fission rate; moderator, which slows down neutrons for efficient fission reactions, using heavy water, ordinary water, or graphite; coolant, which transfers heat from the reactor core to the steam generator, using heavy water, helium, or water; and the steam generator, which converts water into steam to drive turbines. A reactor works in four steps: fission releases heat energy; the coolant circulates through the core, absorbing heat; the coolant transfers heat to the steam generator, producing steam; and steam drives turbines to generate electricity. Water itself is remarkable: it can dissolve more substances than any other liquid because it is dipolar in nature, and the surface of a lake is frozen in severe winter but the water at its bottom is still liquid, because the density of water is maximum at 4 degrees C.
Reactor type | Coolant and moderator | Key features |
|---|---|---|
Pressurised Heavy Water Reactor (PHWR) | Heavy water (D2O) as coolant and moderator | Fuel is typically natural uranium (uranium-238), which sustains a chain reaction without extensive enrichment; boron control rods |
Small Modular Reactors (SMRs) | Varies | Capacity up to 300 MW(e) per unit; smaller and modular, allowing factory assembly and transport |
Gas-Cooled Reactors (GCRs) | Gas (helium, carbon dioxide) | Can operate at significantly higher temperatures, achieving thermal efficiencies up to 50 percent; also usable for hydrogen production and water desalination |
Light Water Reactors (LWRs) | Ordinary water | Boiling Water Reactor (BWR) heats water directly to produce steam; Pressurised Water Reactor (PWR) heats pressurised water to produce steam in a secondary circuit |
Fast reactors | No moderator | Convert non-fissile uranium-238 into fissile plutonium for fuel; utilise fast neutrons and often rely on plutonium |
Radioisotope Thermoelectric Generators (RTGs) are devices that convert the heat released by the decay of radioactive isotopes into electrical power. They typically consist of a radioisotope heat source, thermoelectric converters, and a thermal insulation system. Plutonium-238 is the most commonly used isotope due to its favourable half-life and heat output. The heat from radioactive decay generates a temperature difference across thermoelectric materials, producing electricity via the Seebeck effect. RTGs provide electrical power to spacecraft using heat from the natural radioactive decay of plutonium-238, in the form of plutonium oxide.
Nuclear power in India
Nuclear energy is the fifth-largest source of electricity in India, contributing about 3 percent of the country's total electricity generation. Installed capacity is 8,780 MW as of December 2025, with 24 operating reactors across 7 nuclear power plants, primarily pressurised heavy-water reactors (PHWRs), with some light-water reactors (LWRs). Contribution to electricity generation is approximately 3 percent (2022-23). Plans for expansion aim to increase nuclear power capacity to 22,480 MW by 2031, accounting for nearly 9 percent of the energy mix by 2047.
India's three-stage civil nuclear power programme
India's Three-Stage Nuclear Power Programme, proposed by Dr. Homi J. Bhabha in the 1950s, aims to create a self-sustained nuclear power industry. Stage I: Pressurised Heavy Water Reactors (PHWRs) utilise natural uranium, which contains trace amounts of fissile uranium-235. Heavy water serves as both coolant and moderator, effectively slowing down neutrons to sustain a chain reaction. The byproduct is plutonium-239 (Pu-239) for further stages. Stage II: Fast Breeder Reactors (FBRs) utilise plutonium-239 as fuel, operate on fast neutrons, breeding more plutonium from uranium-238 and producing uranium-233. BHAVINI, a wholly owned Government of India undertaking under the Department of Atomic Energy, has been established for this stage. India's first indigenous Fast Breeder Reactor (500 MWe) at Kalpakkam, Tamil Nadu, started core loading of fuel on 4 March 2024. Stage III: Thorium-based reactors aim to use thorium-232 as fuel, breeding uranium-233, potentially expanding India's nuclear fuel resources. This is the desired goal as India has abundant thorium reserves along coastal plains in forms such as monazite sands, holding about 25 percent of the world's thorium reserves.
Uranium and thorium in India
India has estimated uranium reserves of around 4,23,222 tonnes, ranking 15th globally, and is the world's 8th largest producer of uranium, with annual output exceeding 600 tonnes. India currently relies heavily on uranium imports, primarily from Russia, Australia, and Kazakhstan. Enriched uranium is uranium whose concentration of the isotope uranium-235 (U-235) has been increased compared to natural uranium. Natural uranium typically consists of approximately 99.3 percent Uranium-238 (U-238) and 0.7 percent Uranium-235 (U-235). Low-enriched uranium (LEU) has a higher concentration of U-235 than natural uranium but still below 20 percent, and is used as fuel in commercial nuclear power reactors. Highly enriched uranium (HEU) has a U-235 concentration of over 20 percent, and has been historically used in military applications, including the production of nuclear weapons.
India has vast reserves of thorium, estimated at over 500,000 tons, accounting for roughly 25 percent of the world's known reserves. It is predominantly found associated with minerals like monazite, zircon, and ilmenite. Beach sands and placer deposits along the eastern coast constitute the largest source of thorium, and inland deposits, including carbonatite intrusions and pegmatites, contribute to the overall reserves. Major thorium deposits are in Andhra Pradesh (31 percent), Tamil Nadu (22 percent), Odisha (20 percent), Kerala (12 percent), Gujarat (3 percent), and Bihar (2 percent). Thorium is approximately four times more abundant than uranium in the Earth's crust, making it a more sustainable long-term fuel source. Although not directly fissile, thorium-232 can be converted into fissile uranium-233 through neutron capture. Thorium-based reactors produce less long-lived radioactive waste compared to uranium reactors, and their designs can incorporate inherent safety features that make them less susceptible to accidents.
Aspect | Thorium | Uranium |
|---|---|---|
Abundance | More abundant in the Earth's crust | Abundant, but isotopes like U-235 require enrichment |
Nuclear reactor use | Used in Advanced Heavy Water Reactors (AHWRs) in India's programme | Used in various reactors, including PWRs and BWRs |
Fertile material | Thorium-232 is fertile, converting into fissile uranium-233 | Uranium-238 is fertile, converting into fissile plutonium-239 |
Fuel cycle | Breeds fissile uranium-233; part of India's Three-Stage Programme | Involves U-235 enrichment; spent fuel contains fission products |
Proliferation risks | Fewer proliferation risks | Greater proliferation concerns with traditional fuel cycles |
Waste products | Expected to produce less long-lived radioactive waste | Generates long-lived radioactive waste |
Economic considerations | Economic viability under development | Established infrastructure for uranium-based energy |
Safety features | Associated with specific safety features | Modern reactors have safety features, but some designs pose risks |
India's nuclear power and energy policy
The pillars of India's nuclear policy are No First Use (NFU), a commitment to never initiate a nuclear attack even if facing conventional aggression; credible minimum deterrence, maintaining a nuclear arsenal sufficient to deter adversaries from nuclear attacks; and peaceful use of nuclear energy, emphasising power generation and medical applications. The programme has two phases. The passive phase, 1945-1974: in 1945 the Tata Institute of Fundamental Research (TIFR) was established by Homi J. Bhabha; in 1948 the Atomic Energy Commission (AEC) was established; in 1954 the Department of Atomic Energy (DAE) was formed; in 1969 the nuclear power grid was connected to the Tarapur plant; and in 1974 the first nuclear test, Smiling Buddha, led to international sanctions. The active phase, 1987 to present: in 1987 the Nuclear Power Corporation of India Limited (NPCIL) was established, and in 2022 there were 22 operational nuclear reactors with a total capacity of 6,780 MW, with 10 reactors under construction with 8,000 MW capacity.
The institutions involved are the Department of Atomic Energy (DAE), which oversees nuclear energy programmes, ensuring safety and regulations; the Bhabha Atomic Research Centre (BARC), the premier facility for peaceful nuclear applications and multidisciplinary research; the Global Centre for Nuclear Energy Partnership (GCNEP), which promotes international collaboration through research projects, expert exchanges, and training programmes; and the Atomic Minerals Directorate for Exploration and Research (AMD), responsible for exploring and assessing atomic minerals in India. Safety is overseen by independent regulatory bodies like the Atomic Energy Regulatory Board (AERB) in India, and internationally by the International Atomic Energy Agency (IAEA) and the World Association of Nuclear Operators (WANO). Command and control rests with the Nuclear Command Authority (NCA), established in 2003 to oversee nuclear weapon operations, comprising the Executive and Political Councils, and the Strategic Nuclear Command, custodian of India's nuclear arsenal, responsible for executing nuclear policy. For the wider nuclear story, see the nuclear energy coverage.
Key nuclear energy agreements are with the United States (2008, the Indo-US Civil Nuclear Agreement for civilian nuclear cooperation), France (2008, fuel supply and joint research), Russia (2009 and 2018, plant construction and uranium supply), Canada (2010) and Australia (2014, nuclear fuel supply and cooperation in safety), Kazakhstan (2016, uranium supply), Japan (2017, cooperation in nuclear safety research and development), and South Korea (2018, joint construction of nuclear power plants in India). International treaties and arrangements include the CTBT, which aims to ban all nuclear explosions but is not ratified by several key countries; IAEA safeguards, which ensure peaceful use of nuclear technology and implement NPT agreements; and the Convention on Nuclear Safety, a legally binding international treaty under which 80 Contracting Parties commit to maintain a high level of safety at civilian, land-based nuclear power plants. The Non-Proliferation Treaty is a multilateral treaty to prevent nuclear weapons proliferation; India did not sign it, citing its discriminatory nature.
Radioactivity basics
Radioactive decay is the spontaneous loss of energy from an unstable atomic nucleus, often resulting in radiation. Its types are alpha decay, emission of an alpha particle (two protons, two neutrons); beta decay, emission of a beta particle (electron or positron); and gamma decay, emission of a high-energy gamma ray. The rate of decay is proportional to the number of radioactive nuclei present, with a constant decay probability per unit time. The half-life is the time required for half of the atoms in a sample to decay.
Applications of radiation technologies span medicine, industry, research, agriculture, and space. In medicine: diagnostic imaging with X-rays; radiation therapy using X-rays and gamma rays to treat cancer; and nuclear medicine, with radioactive tracers such as technetium-99m for imaging and diagnosis, including PET scans for metabolic processes. In industry: non-destructive testing with X-ray and gamma-ray techniques for inspecting materials in aerospace and manufacturing; food irradiation, which extends shelf life and enhances safety by preventing microorganism growth; sterilisation, with gamma radiation and electron beams sterilising medical equipment and food products; and materials modification, changing properties of materials through ionising radiation. In research and monitoring: particle accelerators for fundamental research, materials science, and isotope production, and radiation monitoring for safety in nuclear facilities and medical settings. In agriculture: gamma radiation induces mutations for new crop varieties and pest control, and soil moisture measurement with neutron probes and gamma-ray techniques assesses soil moisture for efficient irrigation. In space exploration and environmental remediation: nuclear thermal propulsion and RTGs for space missions, and decontamination techniques like soil washing and phytoremediation for cleanup.
The isotope of the element used in the treatment of cancer is cobalt.
Energy and the Environment
Energy choices show up in the air, the water, and the climate, so this section closes the loop between the fuel and the world it burns in. Air is a mixture of nitrogen, oxygen, carbon dioxide, water vapour and a few other gases along with dust particles. The envelope of air that surrounds the Earth is the atmosphere, which is essential for life: nitrogen gas makes up 78 percent of the atmosphere and oxygen is found to the extent of 21 percent. Air helps in the movements of sailing gliders, parachutes and aeroplanes, propels windmills which generate electricity, lets birds, bats and insects fly, supplies dissolved air in water for aquatic animals, helps in the dispersal of seeds and pollen, and plays an important role in the water cycle. Around 71 percent of the Earth's surface is covered with water, but freshwater makes up only about 2.5 percent of all water on Earth. Water circulates through evaporation and transpiration, condensation into clouds, and precipitation as rain, snow or hail, and groundwater, stored below the water table and in aquifers, is recharged by infiltration of rainwater. The water table can be depleted by increase in population, agriculture and industry, scanty rainfall, deforestation, and decrease in the effective area for seepage.
Pollution is the introduction of harmful materials into the environment, and pollutants are the substances which contaminate the air and water. Air pollutants include carbon monoxide, nitrogen oxides, carbon dioxide, methane, and sulphur dioxide, from natural sources like forest fires and volcanic eruptions, and human activities such as factories, power plants, automobile exhausts, and burning of firewood and dung cakes. Vehicles produce high levels of pollutants and tiny suspended particles that reduce visibility and cause disease when inhaled. Carbon monoxide, from incomplete burning of fuels, is a poisonous gas that reduces the oxygen-carrying capacity of the blood. Smog, made of smoke and fog, forms in winter, and smoke may contain oxides of nitrogen which combine with other air pollutants and fog to form smog, causing breathing difficulties such as asthma, cough and wheezing in children. Petroleum refineries are a major source of gaseous pollutants like sulphur dioxide and nitrogen dioxide, and sulphur dioxide can cause respiratory problems, including permanent lung damage. Chlorofluorocarbons (CFCs), used in refrigerators, air conditioners and aerosol sprays, damage the ozone layer.
Volatile organic compounds (VOCs) are organic chemicals that easily evaporate at room temperature, contain carbon-based molecules, and contribute significantly to air pollution and human health issues. Their health effects include eye, nose, and throat irritation, headaches, liver and kidney damage, and some are carcinogenic. Indoors they can cause Sick Building Syndrome, outdoors VOCs plus nitrogen oxides form ozone in sunlight and hence photochemical smog, and some VOCs are greenhouse gases such as methane and isoprene. Harmful VOCs include formaldehyde from furniture, plywood, textiles, and disinfectants; benzene from vehicle exhaust, tobacco smoke, and industrial use, which affects bone marrow and causes leukaemia; toluene from paints, thinners, and adhesives; xylene from printing, rubber, and leather industries; acetone from nail polish remover and cleaning agents; styrene from plastic, rubber, and insulation materials; chloroform, a disinfection byproduct in water; carbon tetrachloride from refrigerants and cleaning agents, toxic to the liver and ozone-depleting; 1,3-butadiene from fuel combustion and synthetic rubber production; and ethylene glycol from antifreeze, paints, and solvents.
The Taj Mahal is the textbook case. Pollutants in the air are discolouring its white marble: industries in and around Agra, like rubber processing, automobiles, chemicals, and especially the Mathura oil refinery, produce sulphur dioxide and nitrogen dioxide, which react with water vapour to form sulphuric acid and nitric acid. The acids drop down with rain, making the rain acidic, which is acid rain, and acid rain corrodes the marble, a phenomenon also called marble cancer. Suspended particulate matter, such as soot from the Mathura oil refinery, has contributed towards the yellowing of the marble. The Supreme Court has ordered industries to switch to cleaner fuels like CNG and LPG, and automobiles to switch over to unleaded petrol in the Taj zone.
The greenhouse effect works like this: the Sun's rays warm the Earth's surface, a part of the radiation is absorbed and a part is reflected into space, and a part of the reflected radiation is trapped by the atmosphere, further warming the Earth. Gases such as carbon dioxide, methane, nitrous oxide, and water vapour contribute to this effect and are called greenhouse gases, along with ozone and fluorinated gases such as CFCs and HFCs. Carbon dioxide traps heat and does not allow it to escape into space, so the average temperature of the Earth's atmosphere is gradually increasing, and this long-term rise is called global warming. It can cause sea levels to rise dramatically, wide-ranging effects on rainfall patterns, agriculture, forests, plants and animals, and the melting of the Gangotri glacier in the Himalayas. An increase in the Earth's temperature by even as little as 0.5 degrees C can have serious effects, and a recent climate change report gives only a limited time to keep greenhouse gases at the present level, otherwise the temperature may rise by more than 2 degrees Celsius by the end of the century, a level considered dangerous. Primary sources of greenhouse gases are burning of fossil fuels, deforestation, livestock emissions, synthetic fertilisers, landfills, and industrial processes.
Global dimming, caused by increased atmospheric particulates, leads to a fall in temperature.
The cycles that move carbon, nitrogen, and oxygen through the living world are the reason energy choices cannot be separated from ecology. In the carbon cycle, carbon is incorporated into life forms through photosynthesis, which converts carbon dioxide from the atmosphere or dissolved in water into glucose molecules. Respiration converts glucose back into carbon dioxide, and the combustion of fuels also adds carbon dioxide to the atmosphere. In the nitrogen cycle, nitrogen is an essential nutrient for all life forms, but other than a few forms of bacteria, life forms cannot convert the comparatively inert nitrogen molecule into nitrates and nitrites. Certain bacteria and blue-green algae present in the soil fix nitrogen from the atmosphere and convert it into compounds of nitrogen, plants take up nitrates and nitrites and convert them into amino acids to make proteins, animals feeding on plants get these proteins, and when plants and animals die, bacteria and fungi convert the nitrogenous wastes into nitrogenous compounds to be used by plants again, while other bacteria convert some part of them to nitrogen gas which goes back into the atmosphere, so the percentage of nitrogen in the atmosphere remains constant. In the oxygen cycle, oxygen from the atmosphere is used up in combustion, respiration, and the formation of oxides of nitrogen, and it is returned to the atmosphere in only one major process, photosynthesis.
Elemental oxygen is normally found as a diatomic molecule, O2. In the upper reaches of the atmosphere, a molecule containing three atoms of oxygen is found with the formula O3, called ozone. Unlike normal oxygen, ozone is poisonous but is not stable nearer to the Earth's surface. It absorbs harmful radiations from the Sun and prevents them from reaching the surface, where they may damage many forms of life. Man-made compounds like CFCs, on reaching the ozone layer, react with its molecules, which results in a reduction of the ozone layer, and a hole in the ozone layer above Antarctica has been discovered. CFCs are composed of carbon, chlorine, and fluorine, are used as refrigerants, aerosol propellants, solvents, and foam-blowing agents, are a major cause of ozone depletion because chlorine atoms destroy ozone molecules, have high global warming potential, and persist in the atmosphere for decades. Hydrofluorocarbons (HFCs) replaced CFCs in refrigeration and air conditioning: they do not deplete ozone because they contain no chlorine, but they are potent greenhouse gases with high global warming potential.
Forests are the other half of the carbon story. Plants release oxygen through photosynthesis and help maintain the balance of oxygen and carbon dioxide in the atmosphere, which is why forests are called green lungs. In a forest, trees form the uppermost layer, followed by shrubs, herbs, and the lowest layer of vegetation, and the branches of the tall trees look like a roof over the other plants, called a canopy. The food chain in a forest runs grass to insect to frog to snake to eagle, and many food chains are linked: if any food chain is disturbed, it affects other food chains. Decomposers such as mushrooms and other microorganisms feed on dead plant and animal tissues and convert them into humus, releasing nutrients into the soil, so nothing goes to waste in a forest. Forests help control floods, maintain the flow of water in streams, protect soil, provide habitat to a large number of animal species, help bring good rainfall in neighbouring areas, and influence climate, the water cycle, and air quality. Deforestation, the permanent removal of trees, increases temperature and pollution, disturbs the water cycle and may reduce rainfall, increases carbon dioxide and global warming, decreases the water holding capacity of soil, lowers the groundwater level, increases soil erosion, and can convert fertile land into desert, which is desertification. Reforestation is restocking destroyed forests by planting new trees, generally of the same species found in that forest, and it can also take place naturally if the deforested area is left undisturbed.
Water pollution is the contamination of water by substances harmful to life: sewage, agricultural chemicals, and industrial waste. People throw garbage, untreated sewage, dead bodies, and other harmful things directly into rivers; industries discharge harmful chemicals including arsenic, lead and fluorides; pesticides and weedicides dissolve in water and are washed into water bodies and seep into groundwater; and hot water from power plants raises the temperature of rivers, affecting the animals and plants living in them. Ponds look green because of excessive chemicals washed from fields, which act as nutrients for algae to flourish; once the algae die, decomposers like bacteria use up a lot of oxygen in the water, decreasing the oxygen level and killing aquatic organisms. Water contaminated with sewage may contain bacteria, viruses, fungi, and parasites which cause diseases like cholera, typhoid, and jaundice. The Ganges is one of the ten most endangered rivers in the world: it is dead at many places where pollution levels are so high that aquatic life cannot survive, and Kanpur has more than 5,000 industries, including fertiliser, detergent, leather, and paint industries, discharging toxic chemical wastes into the river. The Ganga Action Plan was launched in 1985 to reduce pollution levels, and the government has since launched the National Mission for Clean Ganga (NMCG) in 2016. Water which is purified and fit for drinking is potable water: it can be made safe by filtration, by boiling, which kills the germs, and by chlorination, adding chlorine tablets or bleaching powder.
A few water facts are worth holding together. 22 March is celebrated as World Water Day, and the year 2003 was observed as the International Year of Freshwater. The amount of water recommended by the United Nations for drinking, washing, cooking, and maintaining proper hygiene is a minimum of 50 litres per person per day, yet 25 percent of the world population is without safe drinking water. A band of social workers has transformed dry rivers in the districts of Alwar, Jaipur, Nagpur, Sariska, Bhandari, and Jahazwali by constructing water harvesting structures. And if the vehicles registered in Delhi were lined up one after the other, the total length would be nearly equal to the combined lengths of the two longest rivers in the world, the Nile and the Amazon.
Measures to combat air pollution are practical and often asked: switch to cleaner vehicle fuels like CNG and unleaded petrol; switch over to alternative fuels instead of fossil fuels, such as solar energy, hydropower, and wind energy; regularly monitor air quality; generate awareness about air pollution; explore walking, bicycle, public transport, and carpool; plant trees and nurture the ones already present; and put dry leaves in a compost pit rather than burning them. Measures to prevent water pollution are to strictly implement laws for industrial units so that polluted water is not disposed of directly into rivers and lakes, install water treatment plants in all industrial areas, and consciously save water and not waste it. Reduce, reuse, and recycle should be the mantra: water used for washing vegetables may be used to water plants in the garden.
Key Terms
calorific value: the amount of heat energy produced on complete combustion of 1 kg of a fuel, expressed in kJ/kg.
fractional distillation: the process that separates crude oil into products by heating it and condensing vapours at different temperatures.
photovoltaic effect: the process in which sunlight dislodges electrons in a semiconductor, creating a flow of electric current.
pumped-storage hydropower: storing energy by pumping water to an upper reservoir at low demand and releasing it through turbines at high demand.
gas hydrate: a crystalline, ice-like compound of water molecules trapping gas molecules, formed under low temperature and high pressure.
syngas: a mixture of carbon monoxide, hydrogen, and carbon dioxide produced by gasification of organic or fossil material.
green hydrogen: hydrogen produced by electrolysis of water using renewable energy, emitting no carbon dioxide.
fuel cell: a device that converts chemical energy directly into electrical energy, typically using hydrogen and oxygen to make water.
fast breeder reactor: a reactor that uses fast neutrons to breed more plutonium from uranium-238, forming Stage II of India's nuclear programme.
greenhouse effect: the trapping of reflected radiation by the atmosphere, which warms the Earth, driven by gases such as carbon dioxide, methane, and nitrous oxide.
Prelims practice
0 of 5 answered · 0 correct
With reference to coal in India, consider the following statements: 1. Anthracite is the purest form of coal with 86-97 percent carbon. 2. Coke is formed by heating coal in an oxygen-free atmosphere. 3. Fly ash can be used as a replacement for some of the Portland cement contents of concrete. Which of the statements given above are correct?
Consider the following statements about solar power: 1. Photovoltaic systems convert sunlight directly into electricity using the photovoltaic effect. 2. Concentrated Solar Power uses mirrors to concentrate sunlight to generate heat. 3. Rajasthan has the highest installed solar capacity in India, with Bhadla Solar Park as its prominent plant. Which of the statements given above are correct?
With reference to green hydrogen, consider the following statements: 1. It is produced through electrolysis using renewable energy. 2. It emits no carbon dioxide in production. 3. The National Green Hydrogen Mission was approved in January 2023 with an outlay of Rs 19,744 crore. Which of the statements given above are correct?
Consider the following statements about India's nuclear programme: 1. Stage I uses natural uranium in pressurised heavy water reactors. 2. Stage II uses plutonium-239 in fast breeder reactors. 3. Stage III aims to use thorium-232 to breed uranium-233. Which of the statements given above are correct?
Which one of the following is the exhaust pipe emission from fuel cell electric vehicles powered by hydrogen?
Frequently asked questions
What is the difference between solar PV and solar thermal?
Solar PV panels convert sunlight directly into electricity using photovoltaic cells, and are used mainly for electricity generation in homes and businesses. Solar thermal panels absorb sunlight to heat a fluid, which is then used for heating purposes such as domestic hot water and space heating. Concentrated solar power is a form of solar thermal: it uses mirrors or lenses to concentrate sunlight onto a small area, generating heat that drives an engine connected to a generator.
Why is thorium so important for India?
India holds over 500,000 tons of thorium, about 25 percent of the world's known reserves, mostly in monazite beach sands along the eastern coast. Thorium is about four times more abundant than uranium in the Earth's crust, and thorium-232 can be converted into fissile uranium-233. That is why Stage III of India's three-stage nuclear programme is built around thorium: it turns India's largest nuclear resource into a self-sustained fuel cycle, with less long-lived radioactive waste than uranium.
How does a fuel cell differ from a battery?
A battery stores chemical energy and converts it into electrical energy, with ions moving between anode and cathode as it charges and discharges. A fuel cell converts chemical energy directly into electrical energy continuously, as long as fuel is supplied: hydrogen splits into electrons and protons at the anode, and the protons combine with oxygen at the cathode to produce water. A hydrogen fuel cell vehicle therefore emits only water vapour.
What is the difference between grey, blue, and green hydrogen?
Grey hydrogen is produced by steam methane reforming of fossil fuels and releases carbon dioxide. Blue hydrogen is also produced by steam methane reforming, but uses carbon capture and storage to cut emissions. Green hydrogen is produced by electrolysis of water using renewable energy such as solar, wind, or hydropower, and emits no carbon dioxide, which is why the National Green Hydrogen Mission targets 5 MMT per annum by 2030.
Why is biomass called renewable even though burning it produces emissions?
Biomass is considered renewable because it can be replenished over a relatively short period of time, unlike fossil fuels that took millions of years to form. It does produce some emissions when burned, which is why it is called sustainable only when managed responsibly. Its value is that it turns waste, crop residue, and dung into electricity, heat, and transport fuel, and biogas plants even clean wastewater while generating power.
What is the greenhouse effect, and why does it matter for energy policy?
The greenhouse effect is the trapping of reflected radiation by the atmosphere, which further warms the Earth. Gases like carbon dioxide, methane, nitrous oxide, and water vapour drive it. Burning fossil fuels raises carbon dioxide levels, which is why energy policy pushes solar, wind, hydro, and green hydrogen: every gigawatt of renewable capacity is a gigawatt that does not add carbon dioxide to the atmosphere.
Asked in the prelims
Previous-year MCQs from this topic
How UPSC has tested this topic in the prelims — pick an option to test yourself.
- 2023Prelims
1.With reference to green hydrogen, consider the following statements: 1. It can be used directly as a fuel for internal combustion. 2. It can be blended with natural gas and used as fuel for heat or power generation . 3. It can be used in the hydrogen fuel cell to run vehicles. How may of the abvoe statements are correct?
- 2012Prelims
2.To meet its rapidly growing energy demand, some opine that India should pursue research and development on thorium as the future fuel of nuclear energy. In this context, what advantage does thorium hold over uranium? 1. Thorium is far more abundant in nature than uranium. 2. On the basis of per unit mass of mined mineral, thorium can generate more energy compared to natural uranium. 3. Thorium produces less harmful waste compared to uranium. Which of the statements given above is/ are correct?
- 2011Prelims
3.Microbial fuel cells are considered a source of sustainable energy. Why? 1. They use living organisms as catalysts to generate electricity from certain substrates. 2. They use a variety of inorganic materials as substrates. 3. They can be installed in wastewater treatment plants to cleanse water and produce electricity.
- 2014Prelims
4.With reference to technology for solar power production, consider the following statements: 1. ‘Photovoltaics’ is a technology that generates electricity by direct conversion of light into electricity, while ‘Solar Thermal’ is a technology that utilizes the Sun’s rays to generate heat which is further used in electricity generation process. 2. Photovoltaics-generates Alternating Current (AC), while Solar Thermal generates Direct Current (DC). 3. India has manufacturing base for Solar Thermal technology, but not for photovoltaics. Select the correct answer using the code given below: