Skip to content

Sunday, 22 November 2026 · New Delhi

Science & Technology — Prelims· Prelims

General Physics and Everyday Chemistry

Motion, pressure, heat, light, sound, electricity and the chemistry of medicines, food and cleaning agents, explained through the everyday situations prelims keeps asking about.

By Harsh21 November 2026Updated 21 November 202630 min readintermediate
General Physics and Everyday Chemistry | UPSC

General physics and everyday chemistry sit at the heart of the science section of the prelims paper. The questions rarely ask for a formula alone. They ask what happens when you cook rice on a mountain, why a straw lifts a drink, why the sky turns red at sunset, or why a pressure cooker finishes the job faster. Each of these everyday puzzles hides one clean principle of physics or chemistry, and once the principle is clear the answer follows.

This chapter walks through those principles in the order a teacher would teach them. It starts with motion and force, moves through pressure, heat, light and sound, then electricity and magnetism, and ends with the chemistry of the kitchen, the medicine cabinet and the world around us. The facts that prelims has actually asked about are marked as you go, so revision can focus on what the examiners keep returning to.

Motion, force and Newton laws

Everything in mechanics begins with two kinds of quantities. A scalar has only magnitude, like distance, speed and mass. A vector has both magnitude and direction, like displacement, velocity and force. Velocity is the rate of change of position in a stated direction, measured in metres per second, and acceleration is the rate of change of velocity, measured in metres per second squared. Momentum is mass multiplied by velocity, measured in kilogram-metres per second, and the total momentum of an isolated system stays constant when no outside force acts on it. That conservation law is what lets a person stranded on a frictionless frozen lake slide to safety by throwing a bag in the opposite direction.

A force is a push or a pull that changes the velocity or the shape of an object, and it is measured in newtons. Newton first law, the law of inertia, says a body stays at rest or in uniform motion in a straight line unless an outside force acts on it, which is why a book on a table stays still until pushed. Newton second law says acceleration is directly proportional to the net force and inversely proportional to mass, written as F = ma, and force is also the rate of change of momentum. Newton third law says every action has an equal and opposite reaction, which is why a rocket climbs as it expels gases downward.

Friction opposes relative motion between two surfaces and arises from microscopic interactions between them. Static friction must be overcome to start moving an object at rest, kinetic or sliding friction opposes surfaces sliding past each other, and rolling friction is far smaller because a rolling object touches the surface at almost a single point, which is why ball bearings make motion smooth. Circular motion is always accelerated because the direction of velocity changes at every instant, even when speed is constant. The centripetal force pulls the object toward the centre of the circle, while the centrifugal force is the apparent outward push felt by the object itself, caused by inertia. Centrifugal force separates cream from milk in a churn, keeps satellites in orbit with gravity, flattens the Earth into an oblate spheroid, and drives the tides together with the gravitational pull of the Sun and Moon.

The value of g, the acceleration due to gravity, at the centre of the Earth is zero. All bodies in the universe attract each other due to the gravitational force. The force with which the Earth attracts an object is called the weight of the object. When a stone tied to a string is whirled in a circle, the work done on it by the string is zero because the force acts at right angles to the motion.

Asked in UPSC Prelims 2004

Pressure, fluids and everyday machines

Pressure is force per unit area, measured in pascals, where 1 pascal equals 1 newton per square metre and 1 atmosphere equals 1.013 x 105 pascals. More force means more pressure, a smaller area means more pressure, and in a liquid pressure rises with depth and with density. Atmospheric pressure falls as altitude rises because the air grows thinner, which is also why less oxygen is available on high mountains.

That fall in pressure changes cooking. At high altitude water boils below 100°C, so rice takes longer to cook because the water never gets as hot. A pressure cooker reverses the effect: the sealed lid raises the pressure inside, the boiling point rises above 100°C, and food cooks faster. The same principle runs a hydraulic lift, where a small force on a small piston is transmitted through a fluid to lift a heavy load, and it explains the straw: sucking lowers the pressure inside the straw and the higher atmospheric pressure outside pushes the liquid up.

Asked in UPSC Prelims 2021

Air moves from high pressure to low pressure, and that simple rule makes the weather. By day the land heats faster than the sea, pressure falls over land, and the sea breeze blows from sea to land. At night the land cools faster, pressure rises over land, and the land breeze blows from land to sea. Clouds form where warm moist air rises into low pressure and cools until water vapour condenses, and deserts form where dry air descends under high pressure and blocks cloud formation. An aeroplane wing uses the same idea: air moves faster over the curved top surface, pressure falls there, and the higher pressure below lifts the wing.

Fluids in motion follow two patterns. In laminar flow the fluid moves in smooth parallel layers, as blood does in narrow capillaries. In turbulent flow the motion is chaotic and mixed, as water rushing through a large pipe. Whether flow is laminar or turbulent is judged by the Reynolds number, a dimensionless number that is low for laminar flow and high for turbulent flow. Diffusion is the spread of particles from high concentration to low concentration, which is how oxygen crosses into red blood cells in the lungs. Osmosis is diffusion of water across a semipermeable membrane, which is how plant roots draw water from soil. Dialysis uses a semipermeable membrane to remove waste from blood, and kidney dialysis machines do exactly that for patients whose kidneys fail.

Surface tension is the skin a liquid forms because surface molecules are pulled inward by cohesion, which is why droplets bead up on a leaf and water striders walk on water. A drop takes a spherical shape because a sphere has the smallest surface area for a given volume. Capillarity is the rise or fall of a liquid in a narrow tube when adhesion to the tube wall beats the liquid cohesion, and it helps water climb the xylem to the top leaves of a tree. When adhesion beats cohesion the meniscus is concave and the liquid rises, as with water; when cohesion wins the meniscus is convex and the liquid falls, as with mercury.

A body floats in a liquid if the buoyant force on it is equal to its weight, and that buoyant force is equal to the weight of the water displaced by the body.

Asked in UPSC Prelims 2012

Heat and thermodynamics

Temperature measures the average kinetic energy of particles and is read in Celsius, Fahrenheit or kelvin, with kelvin as the SI unit. Heat is the energy transferred because of a temperature difference, measured in joules. The two are not the same: heat depends on mass and on the temperature difference, while temperature does not depend on how much substance there is. Heat travels in three ways, by conduction through direct contact, as in a metal rod in a flame, by convection through the motion of a fluid, as in boiling water, and by radiation through electromagnetic waves with no medium at all, as heat arrives from the Sun. Metals conduct well because of free electrons, with silver, copper, aluminium and iron as good conductors, while wood, rubber, cork, wool, glass and paper are insulators.

Dilution of sulphuric acid and the reaction of water with quick lime are examples of exothermic processes, which release heat to their surroundings.

Specific heat capacity is the heat needed to raise 1 kilogram of a substance by 1°C. Water has a very high specific heat, so oceans store huge amounts of heat and release it slowly in winter, keeping coastal regions warmer, and the water in blood and cells steadies body temperature in the same way. Latent heat is the energy a substance absorbs or releases while changing phase without changing temperature, which is why melting ice soaks up so much energy. Water is densest at 4°C, so lakes freeze from the surface first while denser warmer water stays below and aquatic life survives the winter. A black body is a perfect absorber and emitter of radiation, and it radiates according to its temperature, a principle that explains how stars shine.

The working of a refrigerator is based on the second law of thermodynamics. Gases can be liquefied when they are cooled to a low temperature and compressed at a high pressure.

The greenhouse effect is the trapping of the Sun's heat by gases like carbon dioxide, water vapour and methane, which keeps the Earth warm enough for life. Clouds act as a thermal blanket at night and slow cooling, which is why cloudy nights stay warmer than clear ones. Cryogenics is the study of materials below minus 150°C, where superconductivity appears. Its uses include freezing biological samples in liquid nitrogen, superconducting magnets in MRI machines and particle accelerators, cryogenic fuels of liquid hydrogen and oxygen for rockets, cryosurgery to remove tumours, and liquefying natural gas for transport.

Light and optics

Light is radiant energy that behaves both as a wave and as a particle, and in a vacuum it travels at 3 x 108 metres per second, the fastest speed in nature. Reflection is the bouncing back of light from a smooth surface, and its laws are simple: the angle of incidence equals the angle of reflection, and the incident ray, the reflected ray and the normal all lie in the same plane. Mirrors use reflection for grooming and safety, parabolic mirrors focus sunlight in solar cookers, and periscopes use it to see from concealed positions.

If your image appears erect, no matter how far you stand from a mirror, the mirror is likely to be either a plane or convex mirror.

Refraction is the bending of light as it passes from one medium to another, because light changes speed. The refractive index of a medium is the speed of light in a vacuum divided by its speed in that medium. Light slows and bends toward the normal when entering a denser medium, which is why a convex lens converges parallel rays and corrects hyperopia, and it speeds up and bends away from the normal when leaving a denser medium, which is why a concave lens diverges rays and corrects myopia. Water has a refractive index of 1.33 and carbon disulphide of 1.63.

When light travels from a denser to a less dense medium beyond a certain critical angle, it is completely reflected instead of refracting. This total internal reflection carries data through optical fibres with minimal loss, makes diamonds sparkle by bouncing light inside them, and creates mirages, where light bends through layers of hot air and produces a displaced image that looks like water in a desert. Dispersion is the splitting of white light into its seven colours by a prism, because each colour has a different wavelength and refracts by a different amount. Violet bends the most and red the least, and the same three steps of refraction, dispersion and reflection inside raindrops make a rainbow.

The twinkling of a star is due to the refraction of light as starlight bends through layers of air of changing density. When white light splits into its seven colours through a prism, the order is Violet, Indigo, Blue, Green, Yellow, Orange, Red (VIBGYOR), and the phenomenon is called the dispersion of light.

The human eye forms its image when light enters through the cornea, is refracted by the lens, and falls on the retina, where it becomes signals for the brain. In myopia, short sight, the image forms before the retina and a concave lens corrects it. In hyperopia, far sight, the image forms behind the retina and a convex lens corrects it. Lenses also magnify small objects in microscopes and distant objects in telescopes, and advanced optics now drive bionic eyes, which convert light into electrical signals to restore vision in retinal disease.

A converging lens is used in a simple microscope, to magnify a small object placed close to it. In a simple astronomical telescope, the objective and the eyepiece used respectively are a convergent lens and a convergent lens.

Most light that strikes a molecule simply bounces back with the same energy, which is elastic or Rayleigh scattering. A small part is scattered with a slightly changed energy and wavelength, because the light interacts with the vibrations of the molecules. That inelastic scattering is the Raman effect, discovered by C. V. Raman, and the change in the light energy reveals the composition of the material, which is the basis of Raman spectroscopy. National Science Day is celebrated every year on 28 February to mark the discovery.

The Raman Effect: light that changes colourincoming photonmoleculevibratesRayleigh: same energy (most photons)Stokes: photon loses energyAnti-Stokes: photon gains energyDiscovered 28 February 1928National Science Day marks it; Nobel Prize 1930
The Raman Effect (1928): light striking a molecule mostly scatters unchanged (Rayleigh scattering), but a tiny fraction of photons exchange energy with the molecule, emerging with lower energy (Stokes lines) or higher energy (anti-Stokes lines). That energy shift fingerprints the molecule, the basis of Raman spectroscopy.

Sound

Sound is mechanical energy that travels as a wave through a medium, and it cannot travel through a vacuum. It is a longitudinal wave, while light is a transverse wave. Sound travels at about 343 metres per second in air, about 1,480 metres per second in water, and about 5,960 metres per second in steel, because particles in solids sit closer together and pass vibrations on faster than particles in liquids, and liquids pass them faster than gases. Humans hear from 20 hertz to 20,000 hertz, loudness is measured in decibels, and frequency is measured in hertz.

The Doppler effect is the change in frequency of a wave when the source moves relative to the observer. An ambulance siren sounds higher in pitch as it approaches and lower as it moves away. Astronomers use the same effect: light from galaxies moving away is redshifted and light from galaxies moving toward us is blueshifted, and the redshift of distant galaxies is evidence that the universe keeps expanding. Doppler ultrasound measures blood flow, police radar guns measure vehicle speed, and weather radars track wind and storms.

Sonography, the imaging of internal organs with ultrasound, works on the Doppler effect.

Asked in UPSC Prelims 2012

Asked in UPSC Prelims 2007

Sound has practical uses far beyond hearing. Ultrasound uses high frequency sound waves to image internal organs, sonar uses sound propagation to navigate and detect objects underwater, and acoustic levitation lifts small particles with sound waves alone. A sonic boom is the loud shock wave made when an object crosses the speed of sound. The Mach number is the ratio of an object speed to the speed of sound in the surrounding medium, and hypersonic means faster than Mach 5, or five times the speed of sound.

The medium in which the speed of sound is maximum is sea water.

Electricity and magnetism

Electric charge is a property of matter that makes it feel a force in an electromagnetic field. There are positive and negative charges, and charge is measured in coulombs. Electric current is the flow of charge through a conductor, measured in amperes, and it can be direct current, as in batteries, or alternating current, as in home supply. Voltage is the difference in electric potential between two points, measured in volts, and higher voltage lets power travel long distances with less loss. Resistance opposes the flow of current, is measured in ohms, and varies with the material, the length and the cross section of the conductor. Ohm's law states that current is directly proportional to voltage and inversely proportional to resistance.

In a series circuit the same current flows through every component, which is why one failed bulb can darken a whole string of lights. In a parallel circuit every component gets the same voltage, which is why home wiring lets each appliance work independently. A magnetic field is the region around a magnet or a moving charge where magnetic forces are felt, measured in teslas. The Earth 's own magnetic field shields the planet from solar radiation and guides animals on migration.

The rule that determines the direction of a magnetic field produced around a straight conductor carrying current is the right-hand thumb rule. In a short circuit, the value of electric current in the circuit increases very high, and a fuse is the device that protects equipment from such excessive current.

Faraday law of electromagnetic induction says a changing magnetic flux through a circuit induces an electromotive force. Generators use it to convert mechanical energy into electrical energy, and the same principle sits behind wireless charging. Electric motors convert electrical energy into mechanical energy in vehicles and appliances, transformers step voltage up or down for efficient transmission, and MRI machines use strong magnetic fields to image soft tissue in detail. The sky shows the same physics at work: auroras form when charged particles from the Sun meet the Earth magnetic field, and lightning is a sudden discharge of electricity between regions of different charge.

The rule to determine the direction of a current induced in a coil due to its rotation in a magnetic field is the right-hand thumb rule.

Matter, elements and the periodic table

Matter is anything that has mass and occupies space, and it appears as solids, liquids and gases. A pure substance has a fixed composition, while a mixture can be separated by physical means. An element is made of only one kind of atom, a compound is two or more elements joined chemically in a fixed ratio, and a mixture simply holds substances together without chemical bonding. The atomic number of an element is the number of protons in its nucleus, and the mass number is the total of protons and neutrons. Atoms of the same element with different numbers of neutrons are isotopes.

Atoms that have the same mass number but different atomic numbers are known as isobars. The particle responsible for determining the chemical properties of an element is the electron.

Metals are generally hard, lustrous, malleable, ductile and good conductors of heat and electricity, while non-metals are usually dull, brittle and poor conductors. Metalloids like silicon sit between the two and are the backbone of electronics. The reactivity series ranks metals from the most reactive, like potassium and sodium, down to the least reactive, like gold and platinum, and a more reactive metal displaces a less reactive one from its compound. How a metal is extracted depends on where it sits in that series: low reactivity metals can be won by heating their ores, medium reactivity metals are reduced from their oxides, and highly reactive metals need electrolysis.

The presence of a nucleus in the centre of an atom, the comparison of the sizes of atom and nucleus, and the positive charge of the nucleus are explained by Rutherford's nuclear model. Rutherford's alpha-particle scattering experiment on gold foil is responsible for the discovery of the atomic nucleus. An element that has properties of both metals and non-metals is known as a metalloid, for example germanium.

The metal that is widely extracted by the electrolysis of its molten compound is sodium (Na). The metal that is not stored under oil is lithium. Corundum and cryolite are important ores of aluminium, and the first artificially prepared element is technetium (Tc).

Corrosion is the slow eating away of a metal by air and moisture. Iron rusts, copper gains a green coat of basic copper carbonate, and silver tarnishes. It is prevented by painting, greasing, chrome plating, anodising, alloying and galvanization, which coats iron with zinc. An alloy is a homogeneous mixture of metals, or of a metal with a non-metal, made to improve properties: brass is copper plus zinc, bronze is copper plus tin, and stainless steel is iron plus chromium and nickel. Aqua regia, a mixture of concentrated hydrochloric acid and nitric acid, can dissolve even gold and platinum.

Acids, bases and salts

An acid tastes sour, turns blue litmus red, and gives hydrogen ions in water. Common acids are citric acid in citrus fruits, lactic acid in curd, acetic acid in vinegar and oxalic acid in spinach and tomato. A base tastes bitter, feels soapy, turns red litmus blue, and gives hydroxide ions in water. Common bases are sodium hydroxide used in soap, calcium hydroxide or lime water, magnesium hydroxide or milk of magnesia, and ammonium hydroxide. Indicators reveal them: phenolphthalein is colourless in acid and pink in base, and litmus changes colour in opposite directions for the two.

The pH scale runs from 0 to 14 and measures hydrogen ion concentration. A pH below 7 is acidic, 7 is neutral, and above 7 is basic, with lower values meaning stronger acidity. Gastric juice sits near pH 1.2, tooth decay begins below pH 5.5, acid rain is rain with a pH below 5.6, and living organisms need a pH between 7.0 and 7.8 to survive. Ant stings inject formic acid and are soothed by baking soda or calamine, nettle stings inject methanoic acid, and antacids like milk of magnesia neutralise excess stomach acid. When an acid and a base react they form salt and water, which is called neutralisation.

The gas that smells like rotten eggs is hydrogen sulphide (H2S). The oxide that behaves as an amphoteric oxide is aluminium oxide (Al2O3). The gas used in making soft drinks is carbon dioxide.

Salts are the everyday workhorses of chemistry. Bleaching powder, calcium oxychloride, bleaches cotton, linen and wood pulp and disinfects drinking water. Baking soda, sodium bicarbonate, is used in cooking, as an antacid and in fire extinguishers, and on heating it gives sodium carbonate, which is washing soda, used in glass, soap and paper making. Plaster of Paris, calcium sulphate hemihydrate, is a white powder that sets into a hard solid when mixed with water. Ocean water has also changed: its pH has fallen from about 8.2 before industry to about 8.1 today, a 26 percent rise in acidity that weakens coral calcification and threatens shell forming marine life.

The main ingredients for manufacturing glass are silica, sodium carbonate, borax, alumina and cullets. Dilute sulphuric acid and sodium bicarbonate solution are the constituents of a soda-acid fire extinguisher.

Carbon and its compounds

Carbon is a versatile element despite making up only 0.02 percent of the Earth crust. Its power comes from catenation, the ability of carbon atoms to bond with each other into long chains and rings, and from forming four covalent bonds. That is why carbon has more known compounds than any other element. Its allotropes are different forms of the same element, and they behave very differently.

Allotrope

Structure

Key property

Use

Diamond

Three dimensional tetrahedral network

Hardest known natural substance, insulator

Cutting tools, jewellery

Graphite

Layers of carbon sheets

Soft, conducts electricity

Lubricant, electrodes, pencils

Buckminsterfullerene (C60)

Spherical cage of 60 carbon atoms

Dark solid, cage shaped molecule

Nanotechnology, drug delivery research

Graphene

Single layer of graphite

One atom thick, strong, conductive

Electronics, composites

Lonsdaleite

Hexagonal diamond

Harder than diamond

Industrial abrasives

Two carbon compounds appear constantly in daily life. Ethanol is used as a fuel and as a solvent, and ethanoic acid gives vinegar its bite. Ethanoic acid reacts with ethanol in the presence of an acid catalyst to form an ester, the sweet smelling compounds used in perfumes. Concentrated sulphuric acid acts as a dehydrating agent and removes water from ethanol. Saponification is the reaction of a fat or oil with a strong base to give soap and glycerol, and soap cleans because its molecules trap oil and dirt in tiny clusters called micelles that wash away in water.

Methanol is oxidised in the liver to form methanal (formaldehyde), which coagulates protoplasm. The catalytic system used for the reduction of an unsaturated hydrocarbon to a saturated hydrocarbon is nickel and hydrogen (H2). Water is a good solvent for ionic compounds because of its high dipole moment.

Property

Soaps

Detergents

Made from

Sodium or potassium salts of long chain fatty acids

Synthetic surfactants, often from petrochemicals

In hard water

Form scum, a curdy precipitate, and clean poorly

Stay effective, no scum

Biodegradability

Biodegradable

Often non-biodegradable and harder on the environment

Cleaning action

Form micelles that trap oil and dirt

Hydrophilic head and hydrophobic tail, like soaps

Chemistry in everyday life

Medicines are chemicals that interact with the body to treat disease, and using them wrongly can poison. Antibiotics like penicillin, azithromycin, doxycycline and carbapenems kill or slow bacteria, and colistin is kept as a last resort drug against resistant infections. Antiseptics and disinfectants like hydrogen peroxide and isopropyl alcohol became household essentials during the pandemic. Antacids like cimetidine, ranitidine, esomeprazole and pantoprazole cut stomach acid, and antihistamines like cetirizine, loratadine and fexofenadine block histamine in allergies. Analgesics like paracetamol and ibuprofen relieve pain and fever, while oxycodone and fentanyl are powerful opioids whose misuse has driven a public health crisis. Newer treatments include monoclonal antibodies such as tocilizumab, immunotherapy drugs such as pembrolizumab for cancer, and antivirals such as remdesivir and nirmatrelvir.

Food chemistry is full of additives. Aspartame is an artificial sweetener made of amino acids that is several times sweeter than sugar, so a small amount gives the sweetness with far fewer calories. Sucralose and stevia are also popular low calorie sweeteners. Sodium benzoate and potassium sorbate preserve food, while BHA and BHT have raised concern as possible carcinogens. Titanium dioxide whitens candies and toothpaste but faces safety questions in several countries, and bisphenol A in food packaging is discussed for its possible hormonal effects.

Milk is an example of an emulsion.

Cleansing agents show the same trade off between usefulness and harm. Traditional soaps are sodium palmitate and sodium stearate, but soap making has been linked to palm oil deforestation. Synthetic detergents such as sodium dodecylbenzenesulfonate work well in hard water, and newer formulations aim to be biodegradable. Phosphates in detergents have been cut back because they pollute water, and microplastics in scrubs have been banned in many countries. Certain chemicals now carry public warnings of their own: PFAS, the forever chemicals in non-stick cookware, food packaging and firefighting foam, contaminate water supplies; glyphosate faces lawsuits over a possible link to cancer; triclosan in toiletries is harmful at high exposure; oxybenzone in sunscreens damages coral reefs; and formaldehyde in glue, furniture and air fresheners is classified as a carcinogen.

Code

Plastic type

Common uses

Recycling

1

Polyethylene terephthalate (PET)

Water bottles, food packaging

Easily recycled into fibres and containers

2

High density polyethylene (HDPE)

Milk jugs, detergent bottles, grocery bags

Recycled into pipes and plastic lumber

3

Polyvinyl chloride (PVC)

Pipes, vinyl flooring, toys, shower curtains

Rarely recycled due to toxic additives

4

Low density polyethylene (LDPE)

Plastic bags, shrink wraps, squeezable bottles

Difficult to recycle, used for liners and tiles

5

Polypropylene (PP)

Yogurt containers, bottle caps, straws, medicine bottles

Recycled into trays, cables and lights

6

Polystyrene (PS)

Disposable cups, plates, food trays, egg cartons

Hard to recycle, used for insulation and packaging

Plastics are graded by the recycling code stamped on them, and the code tells you what the plastic is and how likely it is to be recycled. Titanium dioxide nanoparticles are a separate story: their high surface area to volume ratio gives paints and coatings stronger UV protection, self cleaning photocatalytic activity and enhanced whiteness.

The compound used in the manufacture of ultra-violet protective glasses is cerium oxide.

Environmental chemistry

Air pollution is the contamination of air by gases and particles from factories, power plants, vehicles and burning firewood and dung cakes. Carbon monoxide comes from incomplete burning of petrol and diesel and blocks oxygen transport in blood. Sulphur dioxide causes acid rain and bronchitis, nitrogen oxides form smog and acid rain, and volatile organic compounds react with nitrogen oxides in sunlight to form ground level ozone and photochemical smog. Chlorofluorocarbons used in refrigerators, air conditioners and aerosol sprays release chlorine atoms that destroy ozone molecules in the stratosphere, thinning the ozone layer that shields the Earth from ultraviolet radiation.

Acid rain is rain made acidic by dissolved sulphur dioxide and nitrogen oxides. It corrodes marble, which is why the Taj Mahal yellows, and it lowers the pH of rivers and lakes. The greenhouse gases are carbon dioxide, methane, water vapour, nitrous oxide and ozone, and their rise drives global warming. In water, nitrates and phosphates from fertiliser runoff and sewage cause eutrophication, where algal blooms use up the oxygen and harm aquatic life. Municipal bodies treat water in sewage treatment plants before supplying it to homes, and water can be made safe to drink by filtration and disinfection.

The physics in this chapter connects directly to the mains science coverage. For more facts in the same style, see the general physics facts collection and the chemistry facts collection, and the everyday chemistry of medicines, food and cleaning agents is covered in depth in chemistry in everyday life.

Rapid revision: facts from recent exams

  • The gas lighter than air is helium.

  • The surface of a new concrete structure is covered with wet straw or gunny bags to prevent fast evaporation.

  • Radiation used for relief from body aches is infra-red radiation.

  • The material used for smart film is indium tin oxide.

  • The compound known as night glowing pigment is europium dopped strontium aluminate.

Key Terms

  • scalar: a quantity with magnitude only, such as distance, speed or mass.

  • momentum: the product of mass and velocity, conserved in an isolated system.

  • centripetal force: the force pulling a body in circular motion toward the centre of the circle.

  • capillarity: the rise or fall of a liquid in a narrow tube due to adhesion and cohesion.

  • specific heat capacity: the heat needed to raise 1 kilogram of a substance by 1 degree Celsius.

  • refractive index: the speed of light in vacuum divided by its speed in a medium.

  • total internal reflection: complete reflection of light at a boundary beyond the critical angle.

  • doppler effect: the change in frequency of a wave when the source moves relative to the observer.

  • ph scale: a 0 to 14 scale of hydrogen ion concentration, below 7 acidic and above 7 basic.

  • saponification: the reaction of a fat or oil with a strong base to give soap and glycerol.

Prelims practice

0 of 5 answered · 0 correct

Q1Prelims practice

Consider the following statements about pressure cookers. 1. The boiling point of water inside a pressure cooker rises above 100 degrees Celsius. 2. Food cooks faster because the temperature inside the cooker is higher than in an open vessel. Which of the statements given above is/are correct?

Q2Prelims practice

Which of the following is the correct order of the speed of sound in different media?

Q3Prelims practice

Consider the following statements. 1. The refractive index of a medium is the ratio of the speed of light in vacuum to its speed in the medium. 2. A convex lens converges light rays and is used to correct hyperopia. 3. A concave lens diverges light rays and is used to correct myopia. Which of the statements given above are correct?

Q4Prelims practice

Tooth decay begins when the pH in the mouth falls below a certain value. What is that value, and which of the following is the correct response to it?

Q5Prelims practice

Consider the following statements about carbon allotropes. 1. Diamond is the hardest known natural substance and is an electrical insulator. 2. Graphite is soft, conducts electricity and is used as a lubricant. 3. Buckminsterfullerene is a spherical cage of 60 carbon atoms. Which of the statements given above are correct?

Frequently asked questions

Why does rice take longer to cook on a mountain?

At high altitude the atmospheric pressure is lower, so water boils below 100 degrees Celsius and never gets hot enough to cook rice quickly. A pressure cooker reverses this by raising the pressure inside, which lifts the boiling point above 100 degrees Celsius and cooks food faster.

Why can sound not travel through a vacuum?

Sound is a mechanical wave that needs particles to pass vibrations along, so it cannot cross empty space. Light is different: it is an electromagnetic wave and travels through a vacuum at 3 x 10 to the power 8 metres per second.

What is the difference between myopia and hyperopia?

In myopia, or short sight, the image forms in front of the retina and a concave lens corrects it. In hyperopia, or far sight, the image forms behind the retina and a convex lens corrects it.

Why do soaps fail in hard water while detergents work?

Hard water contains calcium and magnesium ions that react with soap to form a curdy precipitate called scum, which stops the soap cleaning. Detergents do not form this scum, so they stay effective, though they are often less biodegradable than soaps.

What is the Raman effect?

When light strikes a molecule, most of it scatters elastically with no change in energy, but a small part scatters with a slightly changed energy and wavelength. That inelastic scattering is the Raman effect, and Raman spectroscopy uses the change to identify the composition of materials.

upsc-prelimsScience TechGeneral PhysicsChemistry

Asked in the prelims

Previous-year MCQs from this topic

How UPSC has tested this topic in the prelims — pick an option to test yourself.

  1. 2021Prelims

    1.In a pressure cooker, the temperature at which the food is cooked depends mainly upon which of the following? 1. Area of the hole in the lid 2. Temperature of the flame 3. Weight of the lid Select the correct answer using the code given below.

  2. 2012Prelims

    2.Consider the following statements: If there were no phenomenon of capillarity 1. it would be difficult to use a kerosene lamp 2. one would not be able to use a straw to consume a soft drink 3. the blotting paper would paper would fail to function 4. the big trees that we see around would not have grown on the earth Which of the following statements given above are correct?

  3. 2007Prelims

    3.Consider the following statements : 1. A flute of smaller length produces waves of lower frequency. 2. Sound travels in rocks in the form of longitudinal elastic waves only. Which of the statements given above is/are correct?

Related articles

Continue your preparation with more on this topic.

Miscellaneous Topics, Indian Scientists and Nobel Prizes | UPSCScience & Technology — PrelimsMiscellaneous Topics, Indian Scientists and Nobel PrizesNanotechnology, superconductors, clean water and air, new transport, patents, and the Indian scientists and Nobel laureates every prelims paper draws on.Energy: Conventional and Alternative | UPSCScience & Technology — PrelimsEnergy: Conventional and AlternativeCoal, oil and gas, sun, wind, water and waste, biofuels, hydrogen, batteries, and the atom: India's whole energy story for UPSC Prelims.Defence Technology | UPSCScience & Technology — PrelimsDefence TechnologyIndian defence, from the DAC and DRDO to Agni and BrahMos, the two carriers, the submarine fleet, drones, and the export control regimes that govern them all.Universe and Space Technology: From the Big Bang to Gaganyaan | UPSCScience & Technology — PrelimsUniverse and Space Technology: From the Big Bang to GaganyaanFrom the Big Bang and black holes to orbits, launch vehicles and Gaganyaan, this chapter covers the universe, the solar system and India's space programme: the missions, the machines and the physics prelims keeps asking about.Information and Communication Technology: Waves, Networks and the Digital World | UPSCScience & Technology — PrelimsInformation and Communication Technology: Waves, Networks and the Digital WorldFrom the electromagnetic spectrum to blockchain and quantum computing, this chapter covers the waves, networks and machines behind modern communication: how sound and light carry information, how phones and the internet work, and how India is building its digital future.Health and Diseases: Immunity, Vaccines and Nutrition | UPSCScience & Technology — PrelimsHealth and Diseases: Immunity, Vaccines and NutritionWhat disease means, how immunity and vaccines work, the bacterial, viral and parasitic diseases Prelims asks about, nutrition, drugs, AMR and traditional medicine.