Environment — Prelims· Prelims
Pollution: Causes, Impacts and Control Measures
Air, water, noise, plastic, solid, hazardous, radioactive and electronic waste: what each pollutant is, where it comes from, what it does, and how India measures and controls it.
Pollution is the addition or release of undesirable physical, chemical or biological agents, called pollutants, into the environment through human activities. Prelims asks about it from every angle: the pollutants themselves, what they do to health and climate, the indices that measure them, and the laws and programmes that try to control them. This chapter follows that same order, from air and water to noise, plastic, solid waste, hazardous waste, radioactive waste, e-waste, heavy metals and industrial pollution.
One habit will help you through the whole chapter: always ask what the pollutant is, where it comes from, and what it does. A gas like sulphur dioxide, for example, is a primary pollutant from coal burning, it causes acid rain and harms lungs, and India has been its top emitter in the world for five years running. Hold that pattern and the long lists of facts become a set of short stories.
Types of pollution based on source
Point source pollution is caused by the discharge of effluents at a point and is easy to treat; sewage outlets are the classic example. Non-point source pollution is diffuse pollution that does not come from a single, identifiable source like a pipe or outlet. It results from widespread activities that contribute pollutants through runoff, seepage or atmospheric deposition.
Air pollution
Air pollution occurs when solid, liquid or gaseous substances, including forms of radiation, are introduced into the atmosphere in concentrations high enough to harm living organisms or disrupt environmental processes.
Classification of air pollutants
Primary pollutants: pollutants directly emitted into the atmosphere from a specific source, from natural processes such as volcanic eruptions or human activities such as industrial emissions. Examples: sulphur dioxide (SO2) from power plants and DDT from agricultural applications.
Secondary pollutants: pollutants that form in the atmosphere through chemical reactions involving primary pollutants and other atmospheric components. They are more complex and often more harmful than their precursors. Example: Peroxyacetyl Nitrate (PAN), created when nitrogen oxides (NOx) react with hydrocarbons under sunlight.
Quantitative pollutants: naturally occurring substances such as carbon dioxide and nitrogen oxides that are beneficial or harmless in low concentrations but become pollutants when their levels exceed a threshold. Examples: excess carbon dioxide contributing to global warming, nitrogen oxides leading to acid rain.
Qualitative pollutants: substances that do not naturally occur in the atmosphere but are introduced by human activities. They are entirely synthetic and have no natural threshold. Examples: fungicides, herbicides and persistent organic pollutants like DDT, which have long-lasting harmful effects on ecosystems.
Common air pollutants
Fly ash is ejected mainly by thermal power plants as a by-product of coal burning (asked in UPSC 2020). It pollutes air and water, causes heavy metal pollution in water bodies, and affects crops and vegetation through direct deposition on leaves. Its composition is silica, alumina, oxides of iron, calcium and magnesium, and toxic heavy metals like lead, mercury, cadmium, arsenic, cobalt and copper; the oxides present in large quantities are aluminium, silicate, silicon dioxide (SiO2) and calcium oxide (CaO). Its uses, asked in UPSC 2015 are: it can replace cement by up to 35 percent; it is a better fill material for road embankments; it is used in reclamation of wastelands; it increases crop yield when added to the soil; and it enhances the soil water-holding capacity.
Particulate pollutants are matter suspended in the air, such as dust and soot. Major sources are industries, vehicles, power plants, construction activities and oil refineries.
Particulate | Size | Main sources | Health effect |
|---|---|---|---|
PM 1 | Less than 1 micrometre | Vehicular and industrial emissions | Lung injury, gene damage, and cancer |
PM 2.5 | 2.5 micrometres or smaller | Combustion processes like petroleum and fossil fuels | Penetrates the lung barrier, enters the bloodstream |
PM 10 | 10 micrometres or smaller | Various sources, including dust and combustion | Affects the heart and lungs, causing serious health effects |
Nanoparticles (NPs) are 1-100 nanometres in size. Natural sources include forest fires, volcanic eruptions, weathering and dust storms. They are transported over long distances, remain suspended in the air for days, and react rapidly in the atmosphere, with severe consequences for visibility and climate. Their effects on the environment, asked in UPSC 2014, include dust cloud formation: they contain soot and black carbon and deposit them on Himalayan glaciers, reducing albedo, increasing absorption of the Sun's heat, and increasing melting of glaciers. NPs and hydroxyl radicals (OH) bind, reducing OH in the troposphere and reducing the natural pollutant scrubbing capacity of the atmosphere. They also contribute to ozone depletion through increased production of free radicals like chlorine.
Carbon monoxide (CO) comes from natural sources such as photochemical reactions in the troposphere, volcanoes and forest fires, and from anthropogenic sources such as internal combustion engine exhaust, partial combustion of other fuels and iron smelting. It has a short life of a few months in the atmosphere and burns with a blue flame, producing carbon dioxide. Its health effects are poisoning from poor ventilation and heat management in electronics; it is toxic when its concentration exceeds 35 ppm and combines with haemoglobin to produce carboxyhemoglobin, which affects oxygen transport. Its environmental effects are the formation of tropospheric ozone and elevated methane concentrations.
Carbon dioxide (CO2) comes from natural sources such as volcanoes, hot springs, geysers and carbonate rocks (by dissolution in water and acids), and from groundwater, rivers, lakes, ice caps, glaciers and seawater due to water solubility. Anthropogenic sources are burning of fossil fuel, land use, deforestation and agriculture. It is a colourless and odourless gas, heavier than air. As a health effect, it is an asphyxiant gas which, if concentrations exceed 7 percent, may cause suffocation. Its environmental effects are global warming and ocean acidification, since it dissolves in water to form carbonic acid. The social cost of carbon, asked in UPSC 2020, is a measure, in monetary value, of the long-term damage done by a tonne of CO2 emissions in a given year.
Black carbon (soot) is a solid, short-lived air pollutant released from incomplete combustion at high temperature. Its common sources are vehicle emissions, industrial emissions, and residential heating and cooking. It disrupts regional cloudiness and monsoon rainfall, is the most robust absorber of sunlight and heats the air directly, and reduces albedo after deposition on snow by darkening and heating the surface directly. The largest emitters are India and China, with the Indo-Gangetic plain in the case of India.
Brown carbon is emitted mainly by the combustion of organic matter, that is biomass combustion, with fossil fuel combustion, wildfires and agricultural practices as other sources. It has significant implications for climate change as it can contribute to regional warming by absorbing sunlight, and it also plays a role in air quality and human health, since inhaling these particles can be harmful.
Ozone (O3): good ozone is formed in the stratosphere and absorbs harmful UV rays, while bad ozone, or tropospheric ozone, is a pollutant at ground level, a short-lived greenhouse gas, and is toxic. It is formed mainly when carbon monoxide, nitrogen dioxide and volatile organic compounds react in the presence of sunlight at ground level and convert O2 to O3, so it is a secondary pollutant. It makes up 0.00005 percent by volume of the atmosphere and is unevenly distributed. Its harmful effects are smog, itchy and watery eyes, and damage to sensitive vegetation and ecosystems, especially forests during the growing season; it is transported over long distances by wind, so even rural areas can experience high O3 levels.
Nitrogen oxides (NOx) come from internal combustion engines and coal-burning power plants, lightning, agricultural fertilisation and nitrogen-fixing plants. On health and the environment, they react to form acid rain and tropospheric ozone, and when NOx and volatile organic compounds react in sunlight they form photochemical smog.
Sulphur dioxide (SO2) is released by volcanic activity, burning coal in thermal power plants, diesel fuels, industrial processes like production of paper and the smelting of metals like copper, forest fires and shipping. It is a toxic gas with a pungent, irritating smell. As a health effect it is a poisonous air pollutant that leads to the risk of stroke, heart disease and lung cancer. India has been the top emitter of SO2 in the world for the fifth consecutive year (since 2019), with significant contributions from electricity generation using coal.
Polyaromatic hydrocarbons (PAHs) come from incomplete combustion of organics, cigarette smoke and high-temperature cooking. Naphthalene is a PAH produced commercially in the US to make other chemicals and mothballs. Their health effect is toxic, mutagenic and carcinogenic properties; they are highly lipid soluble and readily absorbed from the gastrointestinal tract of mammals, causing bioaccumulation. They associate with other particulate matter like PM2.5 and PM10 and make them more toxic.
Hydrofluorocarbons (HFCs), asked in UPSC 2023, are entirely human made and widely used in refrigeration, air conditioning, aerosol propellants, foam production, fire suppressants and lubricants. They are composed of hydrogen, fluorine and carbon atoms. They are non-ozone depleting: they do not harm the ozone layer as they lack chlorine and bromine, unlike CFCs and HCFCs. They have a high global warming potential, contributing significantly to climate change. They are chemically stable, providing durability and efficiency, and are subject to a global phasedown under the Kigali Amendment to the Montreal Protocol.
Volatile organic compounds (VOCs) have primary indoor sources such as perfumes, hair sprays, furniture polish, glues, air fresheners, moth repellents, wood preservatives and other products. They are carbon-based chemicals that quickly evaporate at room temperature, for example benzene, ethylene glycol, formaldehyde, methylene chloride, tetrachloroethylene, toluene, xylene and 1,3-butadiene, a precursor to synthetic rubber. Their health effects are irritation of the eye, nose and throat, headaches, nausea and loss of coordination; long-term effects include liver damage. Some VOCs are: ethylene, a carcinogen and natural plant hormone used in agriculture to force the ripening of fruits; formaldehyde, natural, produced by decay of plant material in the soil, used as fungicide, germicide, disinfectant and as a preservative in mortuaries and laboratories, and also a combustion product found in tobacco smoke; toluene, used in paint thinners and as an octane booster in gasoline engines; xylene, a solvent in the printing, rubber and leather industry; styrene, the raw material for polystyrene used to make parts of refrigerators, micro-ovens, automotive parts and computers; and benzene, found in crude oil and an elementary petrochemical, and in cigarette smoke (asked in UPSC 2020), with natural sources including volcanoes and forest fires, used to make plastics, resins, synthetic fibres and rubber lubricants, with a high octane number that makes it an essential component of gasoline (petrol).
Minor air pollutants include lead, a heavy metal present in petrol, diesel, batteries, paints and hair dyes; tetraethyl lead (TEL) was used as an anti-knock agent in petrol, and lead damages kidneys, liver, the nervous system and red blood cell development, causes digestive issues, cancer and mental retardation, and contaminates soil and water as a persistent pollutant. Ammonia is a corrosive, colourless gas with a pungent odour from decaying organic matter, human and animal waste, livestock management and agricultural fertilisers; it irritates eyes, nose and throat, forms PM2.5 when combined with sulphates and nitrates, and contributes to nitrification and eutrophication of aquatic systems. Asbestos is a group of 6 naturally occurring silicate fibrous minerals from mining and construction materials such as insulation and tiles; it causes lung cancer, mesothelioma and asbestosis (pneumoconiosis) from prolonged inhalation. Metallic oxides come from dust deposition from mining and metallurgical processes; they weaken immune response, damage organs such as liver and kidney, cause respiratory and reproductive issues, and reduce plant growth and photosynthesis. Biological pollutants include pollen, mites, pet hair, fungi spores, parasites and bacteria from natural sources and human and animal activities, and they trigger asthma and other allergic diseases. Radon is a naturally emitted radioactive gas trapped indoors in poorly ventilated houses, emitted by soil and confined inside modern buildings, and causes lung cancer and neurodegenerative disorders like Alzheimer's disease.
Major causes of air pollution
Vehicular and industrial emissions, asked in UPSC 2014 and 2021: major pollutants, more than 80 percent, are NOx, CO, SOx and non-methane volatile organic compounds (NMVOCs such as benzene, ethanol, formaldehyde, cyclohexane and acetone). Trace emissions are CH4, CO2, SOx and total suspended particles (TSPs). Critical industries are iron and steel, sugar, paper, cement, fertiliser, copper and aluminium, which contribute to suspended particulate matter (SPM), SOx, NOx and CO2.
Pyrolysis is the technique of breaking down synthetic material at high temperatures (300-400 degrees C) for an hour without oxygen. It is safer than burning but leaves fine carbon matter, pyrogas and oil as residue due to the use of sub-optimum pyrolysis technologies. Fuel adulteration, gasoline and diesel mixed with kerosene, increases emissions of CO, NOx and suspended particulate matter.
Emissions from agriculture, waste treatment and biomass burning, asked in UPSC 2019: critical pollutants are ammonia (NH3), methane (CH4), nitrous oxide, carbon monoxide, ozone and sulphur dioxide. Major pollutants from landfills and wastewater treatment plants are methane and CO2. Stubble burning is the intentional burning of crop residue after grain harvest; it results in air pollution and thick smog formation, loss of soil fertility and loss of soil moisture (asked in UPSC 2015). The 100 Million Farmers platform, asked in UPSC 2024, is a platform for accelerating the transition towards food and water systems that are net-zero (carbon), nature-positive, and that aim to increase farmer resilience.
Indoor air pollution is caused by the burning of coal, charcoal, wood, agricultural residue, animal dung and kerosene, among others, for heating or cooking with limited ventilation. Its pollutants are particulate matter (PM2.5), black carbon, carbon dioxide, carbon monoxide and methane, and VOCs from paints, carpets and furniture. Volcanism releases sulphur dioxide, which can lead to acid rain, sulphur aerosols, which can lead to ozone destruction, carbon dioxide, hydrogen fluoride and hydrogen sulphide.
About 75 percent of global dust is natural while 25 percent is anthropogenic, driven by desertification and overgrazing. Transboundary dust from West Asia settles on Himalayan snow, reducing albedo and accelerating glacier melt. Dust aerosols absorb heat, warming the atmosphere over the Himalayas, and this atmospheric heating can alter pressure gradients, influencing the Indian Summer Monsoon.
Effects of air pollution
Smog, smoke plus fog, is caused by the burning of coal, vehicular emission and industrial fumes (primary pollutants). It contains soot particulates like smoke, ozone (O3), carbon monoxide (CO), sulphur dioxide (SO2), nitrogen dioxide (NO2) and others.
Feature | Sulphurous smog (London smog) | Photochemical smog (summer smog or Los Angeles smog) |
|---|---|---|
Cause | High concentration of sulphur oxides in the air and use of sulphur-bearing fossil fuels, particularly coal; aggravated by dampness and high concentration of suspended particulate matter | Forms in urban areas with high vehicular emissions when nitrogen oxides and volatile organic compounds react in sunlight to form ozone; Peroxyacetyl Nitrate (PAN) is an important component |
Effect | Sulphur smog | Light brownish colouration of the atmosphere, reduced visibility, plant damage, irritation of the eyes, and respiratory distress; temperature inversions are accentuated and precipitation is reduced |
Formation of photochemical smog, asked in UPSC 2013, follows these steps: NO plus VOC gives NO2 (nitrogen dioxide); NO2 plus UV sunlight gives NO plus O (nitrogen oxide plus atomic oxygen); O plus O2 gives O3 (ozone); NO2 plus VOC gives PAN (peroxyacetyl nitrate, C2H3NO5). The overall result is: NO plus VOC plus O2 plus UV gives O3, PAN and other oxidants like OH.
Acid rain is any precipitation which is more acidic than usual, with pH below 5.6. The gases that cause acid rain are SOx (sulphur oxides) and NOx (nitrogen oxides: NO, NO2 and N2O), asked in UPSC 2013. Acid rain damages the environment by reducing soil fertility, harming aquatic life and weakening forests through nutrient loss and toxin exposure. It corrodes buildings, monuments and infrastructure, contributes to respiratory problems in humans, disrupts ecosystems, reduces biodiversity and favours species that tolerate high acidity.
Ocean acidification occurs when the ocean absorbs excess carbon dioxide (CO2) from the atmosphere, resulting in a chemical reaction that lowers seawater pH and reduces carbonate ion availability. It harms marine ecosystems, since organisms like corals, shellfish and some plankton struggle to build and maintain their calcium carbonate shells and skeletons. It disrupts food chains, affects biodiversity and threatens fisheries and livelihoods dependent on marine resources.
Ozone depletion is driven by ozone depleting substances (ODS): chlorofluorocarbons (CFCs), HCFCs and HBFCs, halons used in fire extinguishers, methyl bromide, a fumigant for pest control, carbon tetrachloride and methyl chloroform, used in aerosols and as a solvent for organic compounds and for cleaning metals and circuit boards. These substances release chlorine and bromine when broken down by UV radiation, which destroys ozone molecules. That lets more harmful UV radiation reach the Earth's surface, leading to health issues like skin cancer, cataracts and immune suppression, and environmental impacts such as reduced crop yields and harm to marine ecosystems. The mechanism is: human-made chemicals such as CFCs release chlorine and bromine atoms in the stratosphere; UV radiation breaks these compounds, freeing chlorine and bromine, which then react with ozone (O3) molecules, breaking them into oxygen (O2) and reducing ozone concentration. A single chlorine atom keeps depleting ozone, since the free oxygen atom releases the chlorine again.
Polar stratospheric clouds (PSCs) are high-altitude clouds that form in the stratosphere at extremely low temperatures, typically in polar regions during winter. They consist of water, nitric acid and sometimes ice particles. They provide surfaces for chemical reactions that convert inactive chlorine compounds, like hydrochloric acid (HCl) and chlorine nitrate (ClONO2), into reactive chlorine species. When sunlight returns to polar regions in spring, these reactive chlorine species break down ozone molecules, causing significant ozone loss, such as the Antarctic ozone hole. Ozone depletion and global warming interact in a counter-intuitive way: global warming can lead to a reduction in polar stratospheric cloud formation, which in turn can reduce the pace of ozone depletion.
On health hazards, air pollution contributed to 8.1 million deaths worldwide in 2021, with India and China recording 2.1 million and 2.3 million fatalities respectively, according to a report published by the Health Effects Institute (HEI), making it the second leading risk factor for deaths globally.
Pneumoconiosis is the general term for a class of interstitial lung diseases where inhalation of dust has caused interstitial fibrosis. It is an occupational health disease and mostly affects workers who inhale toxic dust in the mining and construction sectors, especially in the mica and textile industry.
Disease | Affected workers |
|---|---|
Black lung disease | Coal industry workers |
Silicosis | Quarrying, manufacturing and construction workers |
Byssinosis | Yarn and fabric manufacturing workers |
Asbestosis | Asbestos industry workers |
Prevention and control of air pollution
Measures to control industrial pollution include: 1. Filters, devices that remove particulate matter from the gas stream, for example the baghouse filtration system; 2. Electrostatic precipitators, used for removing particulate matter from emissions, commonly used in furnaces, thermal power plants, cement factories and steel plants, where smoke particles pick up a negative charge, are attracted to positively charged collecting plates, and the plates are knocked to remove the particles; 3. Inertial collectors, which collect heavier particles through centrifugation with high efficiency; 4. Scrubbers, wet collectors that eliminate aerosols from gas streams, where particles are collected on a surface or wetted by a scrubbing liquid, and which can remove gases like sulphur dioxide (SO2); 5. Catalytic converters, fitted in automobiles to reduce the emission of poisonous gases such as hydrocarbons, CO and NOx into H2O, CO2 and N2, and which require unleaded petrol since lead deactivates the catalyst; 6. Coal gasification, a process where coal is partially oxidised using air, oxygen, steam or carbon dioxide to produce synthetic gas (syngas), an energy substitute for natural gas and methane, in which ethanol and urea can be produced while nitroglycerine is not practically produced due to the lack of a viable glycerol synthesis pathway from syngas (asked in UPSC 2025), with India's target to achieve 100 MT coal gasification by 2030; 7. Flue-gas desulfurization (FGD) systems, used for removing acidic gases like sulphur dioxide (SO2) and hydrogen chloride (HCl) from flue gases via wet or dry scrubbing, where lime is commonly used in both techniques: limestone-based FGD, where limestone (CaCO3) reacts with SO2 in the presence of water to form calcium sulphite (CaSO3) and carbon dioxide (CO2), and lime-based FGD, where lime (CaO) reacts directly with SO2 to form calcium sulphite; and 8. Fly ash management, where a policy by MoEFCC mandates using fly ash-based products in construction projects, road embankments and landfilling activities, within a 100 km radius of thermal power stations for construction and within 50 km for mine-filling activities.
The Pollution Index for Industrial Pollution Control, developed by the Ministry of Environment, Forest and Climate Change (MoEFCC), rates industrial sectors on a scale of 0 to 100 to encourage cleaner technologies. Under its categorisation, white category industries have minimal pollution impact and do not require Environmental Clearance (EC) or Consent to Operate; they must simply inform the State Pollution Control Board (SPCB) and the Central Pollution Control Board (CPCB). Red category industries are high-pollution industries and are not permitted in ecologically fragile or protected areas.
The National Clean Air Programme (NCAP), asked in UPSC 2019, is the first national-level strategy to tackle air pollution (reducing PM2.5 and PM10) across the country comprehensively, with a time-bound reduction target of 40 percent by 2026 from the 2017 level. It is executed by the Central Pollution Control Board (CPCB) in exercise of powers under the Air (Prevention and Control of Pollution) Act, 1981. It covers 132 non-attainment cities, cities that have fallen short of the National Ambient Air Quality Standards for over five years, identified by the CPCB. Non-attainment cities are those that fail to meet the National Ambient Air Quality Standards (NAAQS) for five consecutive years or more. PRANA, the Portal for Regulation of Air-pollution in Non-Attainment Cities, is a portal for monitoring the implementation of NCAP. The CPCB is a statutory body constituted under the Water (Prevention and Control of Pollution) Act, 1974.
Measures to regulate ozone-depleting substances begin with the Vienna Convention for the Protection of the Ozone Layer, agreed in 1985, which established global monitoring and reporting on ozone depletion. The Montreal Protocol on Ozone-Depleting Substances, asked in UPSC 2015, was agreed in 1987 under the Vienna Convention and facilitates global cooperation in reversing the rapid decline in atmospheric concentrations of stratospheric ozone (good ozone), to phase out the production and consumption of certain chemicals that deplete ozone by specific deadlines. The Vienna Convention and its Montreal Protocol are the first and only global environmental treaties to achieve universal ratification, with 197 parties. The Kigali Amendment to the Montreal Protocol (2016) aims to phase out the manufacture and use of potent greenhouse gases called hydrofluorocarbons (HFCs) by 80-85 percent from their respective baselines, till 2045. It is a legally binding agreement between the signatory parties with non-compliance measures, and it came into effect from 1 January 2019. India consumes only 3 percent of HFCs and will complete its phase-down in 4 steps from 2032 onwards. The Ozone Depleting Substances (ODS) Rules, 2000 are framed under the Environment (Protection) Act, 1986 and set the deadlines for phasing out various ODSs, besides regulating production, trade, import and export of ODSs and products containing ODS. Hydrofluorocarbons are used as an alternative to CFCs and HCFCs or HBFCs; they do not contribute to ozone depletion but are potent greenhouse gases with high global warming potential.
Nitrogen shows a domino effect: nitrogen is essential for life in amino acids and DNA, but reactive nitrogen is a major pollutant. The same nitrogen atom can first form smog in cities, later fall as acid rain, then flow into lakes causing algal blooms and eutrophication, and finally enter the atmosphere as nitrous oxide (N2O), a powerful greenhouse gas. One element, many environmental crises.
Measures taken to control vehicular pollution in India include the Vehicle Scrappage Policy 2021: all Central and State government vehicles that have completed 15 years are to be scrapped from April 1, 2023, and the policy aims to de-register private cars over 20 years old and commercial vehicles over 15 years old. Bharat Stage (BS) norms were instituted by the Government of India to regulate air pollution from motor vehicles by using appropriate fuel and technology; they were introduced in 2000 and limit the release of nitrogen oxides, carbon monoxide, hydrocarbons, particulate matter (PM) and sulphur oxides from vehicles. India leapfrogged to BS VI from 2020, skipping BS V, to achieve its carbon footprint obligations. Advantages of BS VI vehicles and fuel are: reduced particulate matter in diesel cars by 80 percent; nitrogen oxides from diesel cars by 70 percent and petrol cars by 25 percent; reduction in sulphur makes it possible to equip vehicles with better catalytic converters; onboard diagnostics are mandatory for all vehicles; and the measurement of particulate matter changed to a number standard instead of a mass standard.
On electric mobility, the FAME India Scheme, Faster Adoption and Manufacturing of Electric (and Hybrid) Vehicles (Phase II), was notified by the Department of Heavy Industries and promotes adoption of electric vehicles, aiming to convert 30 percent of vehicles to EV by 2030. The Government of India has formulated other measures to promote EV adoption such as the EV Charging Guidelines, tax incentives and Green Tax. One caution the book notes is that pollution can change its address: BS-VI fuel made vehicles cleaner by cutting sulphur to 10 ppm, but removing sulphur needs more energy and hydrogen at refineries, releasing extra CO2 and creating sulphur waste, so pollution moved upstream, from city roads to refinery chimneys.
Indices to monitor air pollution
Index | Implementing authority | Details |
|---|---|---|
National Ambient Air Quality Standards (NAAQS) | Central Pollution Control Board (CPCB) | Applicable all over the country; measures PM2.5 and PM10, sulphur dioxide, nitrogen dioxide, carbon monoxide, ozone, ammonia, lead, benzene, benzopyrene, arsenic and nickel |
National Air Quality Monitoring Programme | Central Pollution Control Board (CPCB) | Aims to determine status and trends of ambient air quality, ascertain compliance with NAAQS, identify non-attainment cities, understand the natural process of cleaning in the atmosphere, and undertake preventive and corrective measures; regular monitoring of four pollutants at all locations: SO2, NO2, RSPM or PM10, and PM2.5 |
National Air Quality Index (AQI) | Launched by MoEFCC (April 2015) under Swachh Bharat; developed by CPCB | Helps citizens judge air quality within their vicinity; considers eight pollutants: PM10, PM2.5, NO2, SO2, CO, O3, NH3 and Pb (UPSC 2016) |
System of Air Quality and Weather Forecasting and Research (SAFAR) | Ministry of Earth Sciences (MoES) | Pollutants included: PM2.5, PM10, ozone, CO, NOx (NO, NO2), SO2, methane (CH4), xylene, toluene, benzene and mercury; gives a real-time air quality index on a 24x7 basis with colour-coding, along with a 72-hour advance forecast; measures air quality of a metropolitan city and weather parameters like temperature, rainfall, humidity, wind speed and direction, UV radiation and solar radiation |
2021 WHO Air Quality Guidelines (AQGs) (UPSC 2022) | WHO | Pollutants: PM2.5 and PM10, ozone, nitrogen dioxide, sulphur dioxide, carbon monoxide |
Measures to control air pollution in NCR
The Graded Response Action Plan (GRAP) was formulated under the directions of the Supreme Court of India in the case of M.C. Mehta v. Union of India (2016). The Environment Pollution (Prevention and Control) Authority (EPCA), a Supreme Court-appointed body notified in 1998 by MoEF under the Environment (Protection) Act, 1986, had the mandate to prevent and control environmental pollution in the National Capital Region and enforce GRAP. Its powers and authority have now been subsumed in the Commission for Air Quality Management (CAQM). The CAQM is a statutory body established under the CAQM Act, 2021 to coordinate, plan and enforce air pollution control measures in the National Capital Region (NCR) and adjoining states: Punjab, Haryana, Rajasthan and Uttar Pradesh. It is the apex authority for air quality management in the NCR, ensuring a coordinated inter-state approach. It is headed by a full-time Chairperson with substantial experience in environmental protection or public administration and is directly accountable to Parliament.
Category | AQI levels | Actions |
|---|---|---|
Severe plus or Emergency | 451 and above | Stop truck entry (except essentials), halt construction, implement odd-even schemes for private vehicles |
Severe | 401-450 | Close brick kilns, hot mix plants, stone crushers; boost natural gas power generation; road cleaning and spraying |
Very Poor | 301-400 | Ban diesel generators, discourage winter fires in apartments |
Poor | 201-300 | Impose fines for garbage burning, enforce firecracker bans, regulate industries; road cleaning and spraying |
Other measures in the NCR are to ban old vehicles, curtail open burning, and use expressways for vehicles bypassing Delhi. Measures to reduce stubble burning include the PUSA Decomposer, a mix of fungal solution, jaggery and gram flour to be sprinkled on the stubble, after which it bio-degrades in 20 days; Super SMS and Happy Seeders, where Super Stubble Management Systems help in chopping the stubble and spreading it evenly, and the Happy Seeder helps in direct sowing of wheat without clearing the stubble; and Gauthan, an innovative experiment by the Chhattisgarh government involving five-acre plots owned by each village where unused stubble or parali is collected through parali daan (people's donations) and turned into organic fertiliser. Other measures are smog towers, structures designed to work as large-scale air purifiers, fitted with multiple layers of carbon nanofiber air filters which clean the air of pollutants as it passes through them; and green crackers, which the Supreme Court mandated in 2019, substituting barium nitrate with potassium nitrate and zeolite to reduce PM10 and PM2.5 by 30 percent, developed by CSIR-NEERI.
Water pollution
Water pollution is the presence of undesirable substances or pollutants in water, whether organic, inorganic, biological, radiological or thermal, which degrades water quality so that it becomes unfit for use.
Measuring pollution load in water
Dissolved oxygen (DO): the level of free oxygen present in water. Optimum DO is important for the survival of aquatic organisms. Factors affecting DO are surface turbulence, photosynthetic activity, oxygen consumption by organisms, presence of organic or inorganic wastes, and decomposition of organic matter. DO content below 8.0 mg per litre means contaminated water; DO below 4.0 mg per litre means highly polluted water.
Biological Oxygen Demand (BOD): the amount of oxygen consumed by bacteria and other microorganisms while they decompose organic matter under aerobic conditions at a specified temperature, expressed in milligrams of oxygen per litre of water (asked in UPSC 2017). A higher BOD indicates high pollution due to biodegradable organic wastes and low DO content. Since BOD is limited to biodegradable materials, it is not a reliable method of measuring water pollution.
Chemical Oxygen Demand (COD): the amount of oxygen in parts per million required to oxidise organic (biodegradable and non-biodegradable) and oxidisable inorganic compounds in the water sample. It gives a more comprehensive idea of the level of pollution in the water sample.
Causes of water pollution
Industrial waste: discharge of heavy metals such as mercury, cadmium, copper, lead, chromium and arsenic, and a variety of organic compounds. According to the Central Water Commission report, iron is the most common contaminant.
Thermal and radiation pollution: an increase in water temperature decreases dissolved oxygen in the water, and a sudden rise in temperature kills fish and other aquatic animals. Nuclear accidents near water bodies, or during natural calamities like tsunamis and earthquakes, pose the risk of radiation leakage into water bodies.
Mining: much water is used in mining operations alongside chemicals such as cyanide, sulphuric acid and mercury, increasing the potential for these chemicals to contaminate ground and surface water. Heavy sand mining in river beds also causes pollution of groundwater and lowering of the water table (asked in UPSC 2018).
Freshwater Salinization Syndrome (FSS): the process of salty runoff contaminating freshwater ecosystems. Salts naturally occur in fresh waters, typically caused by rock weathering and naturally saline groundwater, and this is further catalysed by anthropogenic activities.
Sewage water: discharges from houses and other establishments containing human and animal excreta, food residues, cleaning agents and detergents. Domestic and hospital sewage contain many pathogenic microbes. The acceptable limit of ammonia in drinking water, as per the Bureau of Indian Standards (BIS), is 0.5 ppm.
Agricultural sources: agricultural runoff contains dissolved salts such as potassium, ammonia, toxic metal ions and organic compounds. Fertilisers carry nitrogen, phosphorus and potassium, and excess fertilisers reach the groundwater or mix with surface water. Pesticides contain chemicals such as chlorinated hydrocarbons (for example DDT and Endosulfan), organophosphates, metallic salts and carbonates; many pesticides are non-degradable and their residues have a long life as persistent pollutants. Wastes from poultry, piggeries and slaughterhouses reach the water through runoff.
Invasive aquatic species: for instance water hyacinth, native to the Amazon basin, is the world's most problematic aquatic weed, called the Terror of Bengal. It grows abundantly in eutrophic (nutrient-rich) water bodies and leads to an imbalance in the ecosystem by creating stagnation of polluted water and draining oxygen from the water bodies, resulting in the devastation of fish stock.
Effects of water pollution
On human health, domestic and hospital sewage contain many undesirable pathogenic microorganisms, and their disposal into water without proper treatment may cause outbreaks of serious diseases such as typhoid and cholera. Metals such as lead, zinc, arsenic, copper, mercury and cadmium in industrial wastewaters adversely affect humans and other animals. On the environment, water pollution causes loss of biodiversity as pollutants like heavy metals and pesticides kill aquatic organisms or disrupt their life cycles, while sensitive species face extinction. Excess nutrients from agricultural runoff lead to eutrophication, causing oxygen depletion and dead zones that suffocate aquatic organisms. It also disrupts food chains through bioaccumulation and biomagnification, affecting predators and ecosystems.
Eutrophication is the process of over-enrichment of a water body with nutrients, nitrogen and phosphorus, leading to plentiful growth of simple plant life such as algae and plankton, eventually leading to anoxic conditions for seagrass and other organisms. Natural eutrophication is excess but gradual enrichment, mineral and organic matter, of water bodies through natural events. Cultural eutrophication is the same nutrient enrichment of lakes at an accelerated rate due to human activities and the consequent ageing phenomenon. Eutrophication leads to collapse of food chains, new species invasion, loss of freshwater lakes, and loss of coral reefs due to increased turbidity and algal blooms. An algal bloom is a population of phytoplankton restricting the penetration of sunlight; it results in the death of aquatic plants and hence restricts the replenishment of oxygen. Algal blooms can be any colour, but the most common ones are red or brown tides, and unusually warm water is conducive to blooms.
Bioluminescence is the property of a living organism to produce and emit light. It is an antipredator response. Animals, plants, fungi and bacteria show bioluminescence, and luminescence is generally higher in deep-living and planktonic organisms than in shallow species. Blue tides along the coast, as seen along beaches during the night, are due to this phenomenon.
Marine pollution from plastic waste, oil spills and microplastics harms marine life, leading to ingestion, entanglement and death. On terrestrial ecosystems, polluted water contaminates drinking water sources, impacting wildlife and human health; using polluted water for irrigation degrades soil quality and reduces agricultural productivity; and terrestrial animals drinking contaminated water may suffer from poisoning, reproductive failure or death. On climate and atmosphere, decomposition of organic pollutants in water releases greenhouse gases like methane and nitrous oxide, contributing to climate change. On wetlands, pollution disrupts their natural balance, causing habitat loss and reducing biodiversity; wetlands, which act as natural filters, become overwhelmed by excessive pollution and become ineffective in maintaining ecological health.
Pollution in the river Ganga: almost the entire wastewater and industrial effluents generated by various urban and industrial centres, namely Haridwar, Kannauj, Kanpur, Allahabad, Varanasi, Patna and Kolkata, are disposed of into the river Ganga, from tanneries, sugar and distillery units, and pulp and paper mills. It is polluted by faecal coliform bacteria along its entire length, along with high BOD. Microplastics present in the Ganga include ethylene vinyl, polyacetylene, polypropylene, persistent inorganic pollutants (PIP) and polyamide (nylon). Rivers can heal themselves through dilution, settling of waste and natural oxidation, which break down pollution up to a limit. The Ganga goes a step further: it carries bacteriophages, tiny viruses that destroy harmful bacteria, giving science a reason behind its long-believed self-cleansing power.
Groundwater pollution
Polluted surface water seeps into aquifers, spreading harmful bacteria, viruses and protozoa. Toxic chemicals like pesticides and industrial waste penetrate groundwater, reducing its quality over time. The Central Ground Water Authority has been constituted under Section 3(3) of the Environment (Protection) Act, 1986 to regulate and control development and management of groundwater resources in the country. The Central Ground Water Board was formed in 1970 by renaming the erstwhile Exploratory Tubewells Organisation, and it also discharges the functions of the Central Ground Water Authority to regulate and control the development and management of groundwater since 1997. An aquifer is a body of rock or sediment that holds groundwater, which is precipitation that has infiltrated the soil beyond the surface and collected in empty spaces underground. There are two general types of aquifers: confined and unconfined.
Contaminant | Affected regions or states | Sources or causes | Remediation options |
|---|---|---|---|
Inland salinity | Rajasthan, Haryana, Punjab, Gujarat, Uttar Pradesh, Delhi, Madhya Pradesh, Maharashtra, Karnataka, Bihar, Tamil Nadu | Natural salinity, surface water irrigation without considering groundwater, waterlogging, evaporation | Reverse osmosis, ion exchange, water management practices |
Coastal salinity | Coastal areas of Gujarat, Tamil Nadu, Odisha, Andhra Pradesh, West Bengal, Pondicherry | Sea water ingress, connate water, leachates from salt pans, navigation canals | Reverse osmosis, ion exchange, control withdrawal from freshwater aquifers |
Fluoride | Andhra Pradesh, Gujarat, Rajasthan, Haryana, Karnataka, Maharashtra, Tamil Nadu, Uttar Pradesh, Bihar, Odisha | Geogenic origin, fluoride minerals in rocks (for example fluorite, apatite) | Adsorption (activated alumina), ion exchange, Nalgonda technique, reverse osmosis |
Arsenic | West Bengal, Bihar, Uttar Pradesh, Assam, Chhattisgarh | Geogenic sources, sedimentary formations, volcanics (for example Dongargarh-Kotri rift zone in Chhattisgarh) | Groundwater from arsenic-free aquifers, surface water use, dilution with surface water, adsorption |
Iron | Assam, West Bengal, Odisha, Chhattisgarh, Karnataka, localised areas in many states | Geogenic origin, organic decay, microbial activity, low pH and redox potential | Chemical oxidation, aeration, ion exchange methods |
Nitrate | Alluvial plains, areas of intense agriculture across India | Fertilisers, septic systems, livestock manure, decaying organic matter | Prevention of nitrate leaching, dilution, treatment of groundwater (denitrification, reverse osmosis) |
Uranium pollution in groundwater: the WHO standard is 30 micrograms per litre (ppb) and the Atomic Energy Regulatory Board (AERB) standard is 60 micrograms per litre (ppb, radiological). The top states above 30 micrograms per litre are Punjab (24.2 percent), Haryana (19.6 percent), Telangana (10.1 percent), Delhi (11.7 percent) and Rajasthan (7.2 percent); above 60 micrograms per litre they are Punjab (6.0 percent), Haryana (4.4 percent), Delhi (5.0 percent), Telangana (2.6 percent) and Rajasthan (1.2 percent). In total, 151 districts across 18 states are affected. Health risks are kidney toxicity and potential cancer risk, and treatment methods are reverse osmosis, membrane separation, coagulation and precipitation. The AERB was established under the Atomic Energy Act, 1962, in 1983.
Initiative | Details |
|---|---|
Jal Shakti Abhiyan (JSA) | Launched in 2019 for water-stressed blocks; extended countrywide in 2021-2023 with a focus on rainwater harvesting |
Amrit Sarovar Mission | Launched on 24 April 2022 to rejuvenate 75 water bodies per district under Azadi ka Amrit Mahotsav |
Atal Bhujal Yojana | Rs. 6,000 crore scheme in Gujarat, Haryana, Karnataka, Madhya Pradesh, Maharashtra, Rajasthan and Uttar Pradesh to manage groundwater sustainably |
CGWA Regulations | Regulates groundwater extraction under Environment (Protection) Act, 1986; guidelines amended on 29 March 2023 |
National Aquifer Mapping | 25.15 lakh sq. km area covered; reports shared with States and UTs for interventions |
Master Plan for Artificial Recharge | Envisages 1.42 crore recharge structures to harness 185 BCM of water; shared with States and UTs for implementation |
Model Building Bye Laws (2016) | Rainwater harvesting mandatory for buildings on plots of 100 sq. m. or more; adopted by 35 States and UTs |
Groundwater Assessment | Periodic monitoring supervised by a Central Level Expert Group |
Water pollution control measures
Bioremediation is the use of living organisms to remove contaminants, pollutants or unwanted substances from soil or water. Microorganisms can be specifically designed for bioremediation using genetic engineering techniques (asked in UPSC 2017). In-situ (at the site) bioremediation includes bioventing, supply of nutrients through wells to contaminated soil to stimulate the growth of bacteria; biosparging, injection of air under pressure below the water table to increase groundwater oxygen concentrations and enhance the rate of biological degradation of contaminants by bacteria; and bioaugmentation, where microorganisms are imported to a contaminated site to enhance the degradation process. Using bioremediation techniques, TERI has developed a mixture of bacteria called Oilzapper and Oilivorous-S, which degrades the pollutants of oil-contaminated sites, leaving behind no harmful residues. Ex-situ bioremediation includes landfarming, where contaminated soil is spread on a prepared bed and tilled regularly to aerate it and encourage microbial activity, so microorganisms degrade organic pollutants in the soil; bioreactors, which require processing contaminated solid water through an engineered containment system; and composting, nature's recycling of decomposed organic materials into a rich soil known as compost, for example Bacillus flexus and Acinetobacter junii, both bacteria with a special gene that aids in arsenic detoxification.
Feature | Anaerobic biodegradation | Aerobic biodegradation |
|---|---|---|
Pathogen inactivation | More than 99 percent pathogen inactivation | Incomplete aeration leads to a foul smell |
Conditions | Complete anaerobic conditions | Forced aeration is essential, which is energy intensive |
Sludge | Sludge generation is significantly less | Generates a large amount of sludge |
Inoculation | One-time bacterial inoculation is enough | Repeated addition of bacteria or enzymes is required |
Maintenance | Minimal maintenance and no recurring cost | Maintenance and the recurring cost is high |
Detergents | Anaerobes can even degrade detergents and phenyl | Cannot tolerate detergents |
Sewage water treatment for domestic use: sewage contains suspended solids, bacteria, algae, viruses, fungi and minerals such as iron and manganese. The processes are coagulation and flocculation, where coagulants like ferric sulphate, sodium aluminate or aluminium sulphate are added to untreated water; filtration, where filters are made of layers of sand and gravel, and in some cases crushed anthracite (coal), which collect suspended impurities and enhance the effectiveness of disinfection; disinfection, where the addition of chlorine or chlorine compounds to drinking water is called chlorination, used before water enters the distribution system to destroy pathogens, though chlorine can combine with naturally occurring organic compounds in water to produce chloroform and other potentially harmful by-products, while ozone gas may also be used for disinfection but, since ozone is unstable, it cannot be stored and must be produced on-site, making it more expensive than chlorination; fluoridation, the controlled adjustment of fluoride to a public water supply solely to reduce tooth decay, which can occur naturally or by adding fluoride; defluorination at the domestic level, carried out by mixing water with an adequate amount of aluminium sulphate (alum) solution, lime or sodium carbonate and bleaching powder depending on its alkalinity and fluoride content, with BIS prescribing 1.0 mg per litre as desirable and 1.5 mg per litre as the permissible limit for drinking water; and pH correction, where lime is added to filtered water to adjust the pH and stabilise the naturally soft water to minimise corrosion in the distribution system and within customers' plumbing.
For removal of iron, BIS prescribes a desirable limit of 0.3 mg per litre. A significant part of iron is oxidised, then the water is made to react with oxidising media (lime); by aeration and further oxidation the dissolved iron is converted to insoluble ferric hydroxide, which can be easily removed through filtration. For removal of arsenic, the BIS prescribed desirable limit is 0.05 mg per litre, and bleaching powder and alum are used for the removal.
Water pollution control in India and Indian river systems
The Government of India safeguards water resources under the Water (Prevention and Control of Pollution) Act, 1974. The Central Pollution Control Board (CPCB), in collaboration with the State Pollution Control Boards (SPCBs), has developed a concept of designated best use based on pH, dissolved oxygen, BOD, total coliform, free ammonia, electrical conductivity and other parameters. The classification helps water quality managers and planners set water quality targets and identify needs and priorities for water quality restoration programmes.
Major river conservation initiatives include the Ganga Action Plan (GAP), the first river action plan taken up by the Ministry of Environment, Forest and Climate Change in 1985 as a centrally sponsored scheme; it was partially successful and closed in 2002, making a significant difference to water quality. The National River Conservation Plan (NRCP) provides financial and technical assistance to States and UTs on a cost-sharing basis to bring rivers to bathing quality standards, including treatment of raw sewage before it flows into the river, prevention and control of industrial pollution, electric crematoria to ensure proper cremation of bodies brought to the burning ghat, and riverfront development works such as improvement of bathing ghats. The Namami Gange Programme (2014) was launched to accomplish the twin objectives of effective abatement of pollution and conservation and rejuvenation of the National River Ganga. Its main pillars are sewerage treatment infrastructure, river-front development, river-surface cleaning, biodiversity, afforestation, public awareness, industrial effluent monitoring and Ganga Gram. The Clean Ganga Fund was set up in 2014 as a trust under the Indian Trust Act, 1882; it allows resident Indians, Non-Resident Indians (NRIs), Persons of Indian Origin (PIOs) and corporates (public as well as private sector) to contribute towards the conservation of the river Ganga, and contributions to it fall within the purview of Corporate Social Responsibility (CSR). The National Ganga Council was established by the River Ganga (Rejuvenation, Protection and Management) Authorities Order, 2016; it replaced the National Ganga River Basin Authority (NGRBA) and is headed by the Prime Minister. The National Mission for Clean Ganga (NMCG), registered as a society under the Societies Registration Act, 1860, is the implementation wing of the National Ganga Council and implements the Namami Gange Programme.
The Swachh Bharat Mission (SBM, 2014) is implemented by the Ministry of Drinking Water and Sanitation (Ministry of Jal Shakti from 2019). It seeks to achieve universal sanitation coverage by making Gram Panchayats Open Defecation Free (ODF), and under SBM incentives are provided for the construction of household latrines. Swachh Bharat Mission II (2020-21 to 2024-25) focuses on Open Defecation Free Plus (ODF Plus), which includes ODF sustainability and solid and liquid waste management (SLWM); ODF Plus converges with MGNREGA and complements the newly launched Jal Jeevan Mission. The National Water Quality Monitoring Programme is executed by the CPCB in association with the SPCBs.
International efforts to combat water pollution
The London Convention on the Prevention of Marine Pollution by Dumping of Wastes and Other Matter (1972), replaced by the 1996 Protocol: aimed at international control and putting an end to marine pollution.
MARPOL Convention (1973): covers pollution from ships, including oil, noxious substances and garbage.
1996 Protocol: replaces the 1972 Convention and calls for appropriate preventive measures when wastes thrown into the sea are likely to cause harm even when there is no conclusive evidence to prove a relation between inputs and their effects. The International Maritime Organization (IMO) is responsible for Secretariat duties concerning the Protocol.
International Maritime Organization (IMO): the global standard-setting authority for the safety, security and environmental performance of international shipping, headquartered in the UK. Its Maritime Environment Protection Committee coordinates the organisation's activities in the prevention and control of marine pollution, covering accidental and operational oil pollution.
Bunker Convention (2001): ensures that adequate compensation is available to persons who suffer damage caused by oil spills, and applies to damage caused by oil spills on the territory, including the territorial sea and exclusive economic zone of state parties.
Ballast Water Management Convention (2004): this IMO convention aims to prevent the spread of harmful aquatic organisms from one region to another through ballast water, widely regarded as the most critical vector for spreading potentially invasive alien species.
Regional Oil Spill Contingency Plan: jointly launched by the South Asia Co-operative Environment Programme (SACEP) and IMO to facilitate international cooperation and mutual assistance in preparing for and responding to major oil pollution incidents in the seas around Bangladesh, India, Maldives, Pakistan and Sri Lanka.
Water conservation
India's water situation: with 18 percent of the world's population and 2.5 percent of the global area, India has just 4 percent of worldwide water resources. Water-scarcity conditions are prevalent in the basins of the Indus, Krishna, Cauvery, Subarnarekha, Pennar, Mahi and Sabarmati, the west-flowing rivers of Kutch and Saurashtra, including the Luni. As per the Central Water Commission, per capita availability in the country will decrease from 1,434 cubic metres per person per year in 2025 to 1,219 cubic metres in 2050. The thresholds are: water stressed condition, 1,700 to 1,000 cubic metres per person per year; water scarcity condition, below 1,000 cubic metres per person per year; chronic water scarcity, 1,000 to 500 cubic metres per person per year; and absolute scarcity, below 500 cubic metres per person per year.
India's groundwater situation, asked in UPSC 2020: according to the Central Water Commission, the annual replenishable groundwater resources in India (2017) are 432 BCM, of which 393 BCM is the yearly extractable groundwater availability. The current annual groundwater extraction is 249 BCM, the largest user being the irrigation sector. About 85 percent of the rural water supply in India is dependent on groundwater. An average drop in groundwater level increases total carbon emissions, since it would need power to pump out water which is largely met by conventional fossil fuels. The Indo-Gangetic Plain and the north-western, central and western parts of India account for the most intensive groundwater-based irrigation.
Measures by the government: water is a state subject, so steps for conservation are undertaken by State governments and the Central Government supplements the efforts. A new Ministry of Jal Shakti was created by merging the Ministries of Water Resources, River Development and Ganga Rejuvenation with Drinking Water and Sanitation, to deal with all matters relating to water at one place in an integrated manner. Programmes launched include Atal Bhujal Yojana (Atal Jal), the Jal Shakti Abhiyan for water conservation, initially focusing on 1,592 water-stressed blocks in 257 districts, the Jal Jeevan Mission (JJM), the Micro Irrigation Fund under NABARD, and the National Perspective Plan (NPP) for water resources development to transfer water from surplus to deficit areas. Projects related to rainwater harvesting, rejuvenation of water bodies and recharging of groundwater run through the Atal Mission for Rejuvenation and Urban Transformation (AMRUT) by the Ministry of Housing and Urban Affairs, the Mahatma Gandhi National Rural Employment Guarantee Scheme (MGNREGS) and the Pradhan Mantri Krishi Sinchayee Yojana, Watershed Development Component (PMKSY-WDC).
The Central Ground Water Board (CGWB) is a subordinate office and the apex organisation of the Ministry of Jal Shakti dealing with groundwater and related issues. The Central Ground Water Authority (CGWA) has been constituted by the Government of India under the Environment (Protection) Act, 1986 to regulate and control the development and management of groundwater resources in the country, and works under the Department of Water Resources, Ministry of Jal Shakti. Its powers and functions, asked in UPSC 2022, include exercise of powers under the Environment (Protection) Act, 1986, resorting to penal provisions, and regulating and controlling the management and development of groundwater in the country and issuing directions for mandatory rainwater harvesting. The Central Water Commission (CWC) was established in 1945; it is a technical organisation that functions as part of the Ministry of Jal Shakti and is entrusted with providing consultation to various state governments on water-body related issues and coordinating various governmental schemes for the conservation, control and utilisation of water resources. The National Aquifer Mapping and Management Programme (NAMMP) is a central sector scheme of the Department of Water Resources, aimed at delineating aquifers and water availability, implemented by the CGWB to facilitate sustainable management of groundwater resources, as part of the Ground Water Management and Regulation Scheme (a central sector scheme). The National Hydrology Project (NHP) is a pan-India, World Bank assisted Central Sector Scheme, with a 100 percent grant to the States, to be implemented for 8 years from 2016-17 to 2023-24; it intends to provide a system for real-time water resources data acquisition, storage, collation and management.
The sponge city concept indicates a particular type of city in which water is conserved, stored, recharged and sustainably used. A sponge city is a permeable system acting like a sponge that absorbs the rainwater; the absorbed water is naturally filtered by the soil and allowed to reach into the urban aquifers, which allows extraction of water from the ground through urban or peri-urban wells, and this water can be easily treated and used for the city water supply.
Noise pollution
Unwanted sound that causes annoyance, irritation and pain to the human ear is termed noise. It is measured in dB (decibels), which indicates the loudness of the sound. The prescribed optimum noise level is 45 dB by day and 35 dB by night as per WHO. The human ear can tolerate noise levels up to 85 dB, and anything beyond that can affect the quality of life. Above 80 dB is loud and hazardous, and 100-125 dB is uncomfortable.
Zone | Daytime (dB) | Night (dB) |
|---|---|---|
Industrial zone | 75 | 70 |
Commercial zone | 65 | 55 |
Residential zone | 55 | 45 |
Silent zone (areas within 100 metres of the premises of schools, colleges, hospitals and courts) | 50 | 40 |
Laws to control noise pollution: earlier, the Air (Prevention and Control of Pollution) Act, 1981; currently, the Noise Pollution (Regulation and Control) Rules, 2000, under the Environment (Protection) Act, 1986. Noise standards for motor vehicles, air-conditioners, refrigerators, diesel generators and certain construction equipment are prescribed under the Environment (Protection) Act, 1986. Noise emanating from industry is regulated by State Pollution Control Boards (SPCBs) under the Air (Prevention and Control of Pollution) Act, 1981. In 2005, the Supreme Court ruled that noise pollution violates Article 21, which ensures the right to life and peaceful living.
Plastic pollution
Plastic pollution is the accumulation of plastic objects and particles in the Earth's environment that adversely affects humans, wildlife and their habitat.
Microplastics: shreds of plastic smaller than 5 mm in length but larger than 1 micrometre, from various sources including the breakdown of larger plastic debris. Uses include cosmetics, personal care products, industrial scrubbers, microfibers in textiles and virgin resin pellets used in plastic manufacturing. The particles can travel around the body and may lodge in organs or the outer membranes of red blood cells and may limit their ability to transport oxygen. Microplastics have also been detected in human blood. Many chewing gums contain plastic as gum base and are considered a source of environmental pollution (asked in UPSC 2024).
Microbeads: very tiny pieces of plastic, larger than 0.1 micrometres and smaller than 5 mm, added to health and beauty products such as some cleansers and toothpaste (cooling crystals). One of the main contributors to microbeads pollution is regular plastic waste, 90 percent of which is not recycled (asked in UPSC 2019).
Nanoplastics: tiny plastic particles smaller than 1,000 nanometres (1 micron) that can pass through physiological barriers and enter organisms and their food chains. Primary nanoplastics are intentionally produced and used in products such as cosmetics, washing powders, research and diagnostics. Secondary nanoplastics are formed in the environment, especially in rivers and oceans, by fragmenting larger pieces of plastic.
Cigarette butts, eyeglass lenses and car tyres all contain plastic or plastic-based polymers, making them significant but often overlooked sources of plastic pollution (asked in UPSC 2025). In the Sundarbans, tiny plastic particles act like meeting points for bacteria: these microbes often carry genes to break plastic, resist antibiotics and tolerate heavy metals, and as plastics gather pollutants they help bacteria share these traits, increasing the risk of stronger, drug-resistant germs reaching humans.
S. No. | Plastic type | Common uses | Recycling potential |
|---|---|---|---|
1 | Polyethylene Terephthalate (PET or PETE) | Water bottles, soft drink bottles, food packaging | Easily recycled into fibers, containers |
2 | High-Density Polyethylene (HDPE) | Milk jugs, detergent bottles, grocery bags | Recycled into pipes, plastic lumber |
3 | Polyvinyl Chloride (PVC) | Pipes, vinyl flooring, toys, shower curtains | Rarely recycled due to toxic additives |
4 | Low-Density Polyethylene (LDPE) | Plastic bags, shrink wraps, squeezable bottles | Difficult to recycle, used for liners, tiles |
5 | Polypropylene (PP) | Yogurt containers, bottle caps, straws, medicine bottles | Recycled into trays, cables, lights |
6 | Polystyrene (PS) | Disposable cups, plates, food trays, egg cartons | Hard to recycle, used for insulation, packaging |
Effects of plastic waste: on health and life, carcinogenic chemicals can cause developmental, reproductive, neurological and immune disorders, and they are known endocrine disruptors, causing weight gain, insulin resistance and decreased reproductive health. Microplastics can be found in drinking water, blood and plaque lining arteries, causing serious health problems such as heart attack and stroke. Burning plastic releases toxic substances into the air, harmful to human health and the environment. On the environment, primary emissions from plastic production include sulphur oxides, nitrous oxides, methanol, ethylene oxide, dioxin and furan and other VOCs. Plastics contaminate foodstuffs due to chemicals leaching into foods and beverages, for example polycarbonate leaches bisphenol A and polystyrene leaches styrene.
Status of plastic waste in India: India is among the largest generators of plastic waste globally, with annual plastic emissions on the order of several million tonnes; other major contributors include China, the United States, Indonesia and Nigeria. India collects only 60 percent of its plastic waste, and the remaining 40 percent enters the environment.
Measures to curb plastic waste include the Plastic Waste Management Rules, 2016: they replaced the Plastic Waste (Management and Handling) Rules, 2011, extending the rules to rural areas, which were earlier applicable only up to municipal areas; they increased the minimum thickness of plastic carry bags from 40 to 50 microns and stipulated a minimum thickness of 50 microns for plastic sheets; they introduced Extended Producer Responsibility (EPR), pinning responsibility on producers, generators and brand owners in waste management and collect-back systems; they provided for plastic waste management fee collection through pre-registration of producers and importers of plastic carry bags and multilayered packaging and vendors selling the same, for establishing the waste management system; they made local bodies responsible for setting up, operationalising and coordinating the waste management system and performing associated functions, and retailers or street vendors must not sell or provide commodities in plastic sheet or multilayered packaging or they are liable to pay fines; and they promoted reuse of plastic waste in road construction, waste-to-oil and waste-to-energy, to enhance plastic recycling and phase out non-recyclable multilayered plastic. The 2018 amendment said only non-recyclable, or non-energy recoverable, or with no alternate use multilayered plastic is to be phased out.
The Plastic Waste Management Amendment Rules, 2021 prohibited identified single-use plastic items, of low utility and high littering potential, from July 2022. The CPCB list of banned plastics (single-use plastic) covers plastic sticks used in earbuds, balloons, candy and ice cream; plastic cutlery; plastic packaging and wrapping films; polystyrene (thermocol) for decoration; PVC banners with thickness below 100 microns; and plastic stirrers. The minimum thickness of plastic carry bags was increased from 50 to 75 microns (2021) and to 120 microns (2022). Guidelines for EPR were to be given legal force, and plastic packaging waste that is not banned is to be collected and managed through Extended Producer Responsibility as per the 2016 rules.
The Plastic Waste Management (Amendment) Rules, 2024 add new requirements for labelling and certification of biodegradable plastics; on Extended Producer Responsibility, producers must report quantities of goods and pre-consumer waste; EPR targets set recycling targets for different categories of plastic packaging; mandatory annual reporting applies for manufacturers, importers and brand owners; category-based recycling sets specific targets for rigid, flexible and multilayered plastics; and there are voluntary guidelines for collaboration with local authorities. Alternatives to plastics include glass, bagasse made from the pulp of sugarcane or beets, bioplastics, natural textiles, edible seaweed cups, algae-blended ethylene-vinyl acetate and compostable plastics. In plastic waste in road construction, Polyblend is a fine powder of recycled and modified plastic waste used to make fabrics; it can be mixed with bitumen used to lay roads, enhances the bitumen's water-repellent properties and helps increase road life by a factor of three.
A circular economy, asked in UPSC 2025, is an economic model that minimises waste by promoting reduce, reuse and recycle, keeping resources in use for longer. By cutting virgin material extraction, landfill waste and incineration, and encouraging reuse, refurbishment and recycling, it lowers energy use and greenhouse gas emissions, by up to 39 percent reduction globally, per the Circularity Gap Report 2021. It reduces wastage in production by improving efficiency and designing durable, repairable and resource-efficient products.
Solid waste
Solid waste includes garbage, construction debris, sludge from waste treatment plants and other discarded solid materials coming from industrial, commercial, mining and agricultural operations and from household and public activities.
Municipal solid waste: everyday items like paper, food wastes, plastics, glass, metals, rubber, leather and textiles discarded by the public.
Industrial waste: thermal power plants produce coal ash or fly ash, and fly ash in concrete increases the life of roads; integrated iron and steel mills produce blast furnace slag, which can be used in Portland cement concrete, road and railway construction and soil conditioning (asked in UPSC 2020); non-ferrous industries like aluminium, copper and zinc produce red mud, used as construction material in bricks, lightweight aggregates and roofing tiles; sugar industries produce press mud, used as a soil conditioner and soil fertiliser; pulp and paper industries produce lime mud, used in bricks, cement, wastewater treatment and agricultural soils; and fertiliser and allied industries produce gypsum, used to treat soil alkalinity and in Portland cement and plaster of Paris (POP).
Residential and commercial waste: food waste, plastics, paper, glass, leather, household items such as electronics, tires, batteries, old mattresses, used oil, wood and cardboard materials.
Construction and demolition sites: new construction sites for buildings and roads, road repair sites, building renovation sites and building demolition sites, producing solid wastes such as steel materials, concrete, wood, plastics, rubber, copper wires, dirt and glass.
Bio-medical waste: solid waste such as syringes, bandages, gloves, drugs, plastics and chemicals from hospitals, biomedical equipment and chemical manufacturing.
Waste management technique | Description | Key features or challenges |
|---|---|---|
Open dumps | Untreated, uncovered waste left in an open area | No waste treatment; environmental hazard |
Landfills | Waste is placed in a pit in the ground and covered with mud after the landfill is full | Can later be developed into usable land (for example parking lot, park) |
Sanitary landfills | A more hygienic version of landfills with proper waste containment | Expensive to construct, more controlled than regular landfills |
Incineration plants | Waste is burned in large furnaces at high temperatures; recyclable material is segregated before burning | Air and water pollution, produces toxic ash, used for infectious waste |
Pyrolysis (UPSC 2019) | Combustion in the absence of oxygen or with controlled oxygen levels, producing products like tar, alcohol and fuel gas | Alternative to incineration, yields useful by-products |
Plasma gasification | High temperature process (with plasma) converts organic waste into syngas; inorganic waste becomes slag | Cleaner than incineration, reduces toxicity and avoids landfilling |
Biomining for recycling | Extracting metals from ores and solid waste using organisms like bacteria or fungi to bioleach metals | Environmental recycling technique for metal recovery |
Waste to Energy (WTE) | Converts waste into electricity or heat; wet waste can produce compost or biogas, while dry waste can be burned to generate energy | Generates energy, reduces waste volume |
Solid waste management is the process of collecting and treating solid wastes and recycling items that do not belong in the trash. Under the Solid Waste Management Rules (2016), responsibilities of waste generators include segregation of waste into three streams: wet waste (biodegradable), dry waste (for example plastic, paper, metal, wood) and domestic hazardous waste (for example diapers, napkins, empty cleaning agent containers). Segregated waste should be handed over to authorised rag-pickers, waste collectors or local bodies. There is a user fee for waste collection services and a spot fine for littering and non-segregation of waste. Used sanitary waste, such as diapers and sanitary pads, must be securely wrapped in manufacturer-provided pouches or appropriate wrapping materials and disposed of in bins for dry or non-biodegradable waste.
Manufacturers and brand owners of disposable products, such as tin, glass and plastic packaging, must provide financial support to local authorities for waste management system development. Biodegradable waste should be processed, treated and disposed of through composting or bio-methanation within the premises wherever feasible. Residual waste should be handed over to waste collectors or agencies designated by local authorities. Waste processing facilities are to be set up by local bodies within the stipulated time frame. For promotion of waste to energy, all industrial units within 100 km of a solid waste-based Refuse-Derived Fuel (RDF) plant must make arrangements to replace at least 5 percent of their fuel requirement with RDF so produced. The Ministry of New and Renewable Energy should facilitate infrastructure creation for Waste to Energy plants and provide appropriate subsidies or incentives. On revision of parameters, a landfill site must be 100 metres away from a river, 200 metres from a pond, 500 metres away from highways, habitations, public parks and water supply wells, and 20 km away from airports or air bases. For promoting the use of compost, the Ministry of Chemicals and Fertilisers should provide market development assistance on city compost, and the Ministry of Agriculture should provide flexibility for the manufacturing and sale of compost and propagate the use of compost on farmland.
The Bio-Medical Waste (Management and Handling) Rules, 2016 improve on the 1998 rules. Biomedical waste comprises human and animal anatomical waste and treatment apparatus used in Health Care Facilities (HCF). The rules cover healthcare activities beyond hospitals, including vaccination camps, blood donation camps and surgical camps. Salient features are: phase out chlorinated plastic bags, gloves and blood bags within two years; 4 categories of biomedical waste instead of the earlier 10, to improve segregation at source; pre-treatment of laboratory waste, microbiological waste and blood samples through sterilisation on site; a bar-code system for bags and containers containing bio-medical waste for disposal; and the procedure that hospitals must put in place mechanisms for effective disposal, either directly or through common biomedical waste treatment and disposal facilities, while hospitals servicing 1,000 patients or more per month must obtain authorisation and segregate biomedical waste into categories as specified by the rules.
Other measures include Waste Minimization Circles (WMC) which help small and medium industrial clusters minimise waste in their industrial plants with assistance from the World Bank and the National Productivity Council, New Delhi, with MoEFCC as the nodal ministry; the policy also recognises the role of citizens and NGOs in environmental monitoring and enables them to supplement the regulatory system. Lakshya Zero Dumpsite was launched by the Ministry of Housing and Urban Affairs under SBM 2.0 to remediate 16 crore metric tons (MT) of legacy waste dumpsites occupying nearly 15,000 acres of city land and rejuvenate urban landscapes.
Hazardous waste
Hazardous waste is any substance present or released in the environment that causes substantial damage to public health and the environment's welfare. It could exhibit one or more of the following characteristics: toxicity, ignitability, corrosivity or reactivity (explosive).
Persistent Organic Pollutants (POPs) are chemical substances that persist in the environment, bioaccumulate through the food web, and pose a risk of causing adverse effects to human health and the environment. They are chemicals of global concern due to their potential for long-range transport and ability to biomagnify and bio-accumulate in ecosystems. The most commonly encountered POPs are organochlorine pesticides, such as Dichlorodiphenyltrichloroethane (DDT), once widely used as an effective pesticide and insecticide, later identified as a POP, with its usage phased out in all developed and developing countries; Endosulfan, Chlordane, Endrin and Heptachlor, used as pesticides and wood preservatives, with the Supreme Court banning the production, distribution and use of endosulfan in India in 2011; Hexachlorobenzene, a fungicide; Polychlorinated biphenyls (PCB), released from the burning of plastics and electrical components, resistant to extreme temperature and pressure, hence widely used in electrical equipment like capacitors and transformers; and dioxins, toxic by-products produced when organic matter is burned.
Other POPs include chlorinated hydrocarbons (organochlorides), POP hydrocarbons in which one or more hydrogen atoms have been replaced by chlorine, for example DDT, used in production of polyvinyl chloride (plastic polymer used to make PVC pipes), chloroform, dichloromethane, dichloroethane and trichloroethane as solvents effective in cleaning applications like degreasing and dry cleaning, and heptachlor and endosulfan as pesticides; and perfluoroalkyl acids (PFAAs), used in water and stain-resistant coatings and oil-resistant coatings, with a long life, stored in glaciers since they do not biodegrade and are passed through several organisms and ecosystems. Glaciers release PFAAs into lakes, which can lead to bioaccumulation of PFAAs in fish. PFAS are widespread in drinking water, food and food packaging materials, and are not easily degraded in the environment. Himalayan glaciers may have higher levels of PFAAs than any other glaciers worldwide, because of their proximity to South Asian countries, the most polluted regions of the world (asked in UPSC 2024).
The Regulation of Persistent Organic Pollutants Rules, 2018 were notified by MoEFCC under the Environment (Protection) Act, 1986. The rules prohibit the manufacture, trade, use, import and export of seven chemicals: Chlordecone; Hexabromobiphenyl; Hexabromodiphenyl ether and Heptabromodiphenyl ether (commercial octa-BDE); Tetrabromodiphenyl ether and Pentabromodiphenyl ether (commercial penta-BDE); Pentachlorobenzene; Hexabromocyclododecane; and Hexachlorobutadiene.
International efforts to contain hazardous wastes
The Stockholm Convention on POPs is an international treaty enacted in 2004 to eliminate or restrict the production and use of POPs. Important listed substances are Aldrin, Heptachlor, Hexachlorobenzene, Endrin, Polychlorinated biphenyl and DDT. India ratified the Stockholm Convention in 2006. Its annexes are: Annex A, chemicals to be eliminated; Annex B, chemicals to be restricted; and Annex C, chemicals to minimise unintentional production and release. At COP9 to the Stockholm Convention, the COP decided to list Dicofol, an organochlorine acaricide used mainly on agricultural crops such as fruits, vegetables and cotton to control mites, in Annex A without any exemption, and Perfluorooctanoic acid (PFOA), used in making Teflon for non-stick cookware, a carcinogen, liver toxicant and developmental and immune system toxicant that can stay in the environment and the human body for long periods, was listed with some exemptions in Annex A.
The Basel Convention on the Control of Transboundary Movements of Hazardous Wastes and Their Disposal is an international treaty that entered into force in 1992 to prevent the transfer of hazardous waste from developed to less developed countries (LDCs) unless the waste is destined for recycling or disposal in an environmentally sound manner. The Basel Ban Amendment (1995) introduces a complete ban on the shipment of hazardous waste from a list of developed (mostly OECD) countries to developing countries, including exports for recycling. Countries like the US, Canada, Japan, Australia, New Zealand, South Korea, Russia, India, Brazil and Mexico are yet to ratify the ban. At COP14 to the Basel Convention the convention was amended to include plastic waste in the Prior Informed Consent procedure; even though the US and a few others have not signed the accord, they cannot ship plastic waste to countries on board with the deal, and India has already imposed a complete prohibition on the import of solid plastic waste into the country. The Bamako Convention is a treaty of African nations prohibiting the import into Africa of any hazardous (including radioactive) waste, and it came into force in 1998.
The Rotterdam Convention on Prior Informed Consent (PIC) Procedure for Certain Hazardous Chemicals and Pesticides in International Trade (2004) is a multilateral treaty that promotes an open exchange of information and calls on exporters of hazardous chemicals to use proper labelling and safe handling and inform purchasers of any known restrictions or bans. Signatory nations can decide whether to allow or ban the importation of chemicals listed in the treaty. The Convention creates legally binding obligations for the implementation of the PIC procedure. At COP9 to the Rotterdam Convention, two new chemicals, acetochlor, hexabromocyclododecane (HBCD) and phorate, were added to the list for mandatory PIC procedures in international trade. The PIC procedure is a mechanism for sharing information and managing international trade in certain hazardous chemicals and pesticides.
The Hong Kong Convention on Recycling of Ships (2009) was developed in cooperation with the International Labour Organization and the Parties to the Basel Convention to address all the issues around ship recycling, including the fact that ships sold for scrapping may contain hazardous substances such as asbestos and heavy metals.
Regulatory measures by India: the Hazardous Wastes (Management and Handling) Rules, 2016 aim to promote recycling and reuse of waste while minimising hazardous waste, and to differentiate hazardous waste from other wastes such as waste tyres, paper waste, metal scrap and used electronics, which are considered resources for recycling and reuse. The waste management priority sequence is: Prevention, Minimization, Reuse, Recycling, Recovery or Utilisation (including co-processing), Safe Disposal. Standard operating procedures (SOPs) and infrastructure specific to waste types are established to protect health and the environment, with compliance verified by SPCBs and Pollution Control Committees (PCCs). On import and export, import of hazardous waste for final disposal is prohibited, while import for recycling, reuse or utilisation is permitted following procedural rules. Prohibited waste imports include waste edible fats and oils of animal or vegetable origin, household waste, critical care medical equipment, tyres for direct reuse, solid plastic waste (including PET bottles), electrical and electronic assemblies scrap, and chemical wastes, especially solvents. Solid plastic waste has been prohibited from being imported into the country, including in Special Economic Zones (SEZ) and by Export Oriented Units (EOU). Exporters of silk waste have been given an exemption from requiring permission from MoEFCC. Electrical or electronic assemblies and components manufactured in and exported from India, if found defective, can now be imported back into the country without obtaining permission from MoEFCC. Industries that do not require consent under the Water (Prevention and Control of Pollution) Act, 1974 and the Air (Prevention and Control of Pollution) Act, 1981 are now exempted from requiring authorisation under the Hazardous and Other Wastes Rules, 2016.
Radioactive pollution
As per estimates, India generates around 4 tonnes of radioactive waste per Gigawatt (GW) of nuclear power capacity annually. Common terms: radioactivity is the phenomenon of spontaneous emission of protons (alpha-particles), electrons (beta particles) and gamma rays (short-wave electromagnetic radiation) due to the disintegration of atomic nuclei of some elements. Radioactive pollution is the increase in radiation levels (nuclear radiation or radioactive contamination) in the environment that poses a severe threat to humans and other life forms. Radioactive contamination is the presence of radioactive substances on surfaces or within solids, liquids or gases, where their presence is unintended or undesirable.
Sources of radioactive pollution are natural radiation sources, cosmic rays from space and terrestrial radiations from radionuclides present in the Earth's crust, such as radium-224, uranium-238, thorium-232, potassium-40 and carbon-14; and artificial radiation pollution from accidental leaks from nuclear power plants and unsafe disposal, mining of radioactive material like uranium and thorium (monazite is the ore of thorium), exposure to radiation for diagnostic purposes such as X-rays and CT scans, chemotherapy, and slow nuclear radiations emanating from nuclear reactors and laboratories.
Feature | Ionizing radiation | Non-ionizing radiation |
|---|---|---|
Definition | Energetic enough to remove tightly bound electrons from atoms, creating ions | Radiation that does not have enough energy to ionize atoms or molecules |
Examples | X-rays, gamma rays, alpha particles, beta particles | Radio waves, microwaves, infrared radiation, visible light, UV radiation (non-ionizing part) |
Effect | Can damage living cells, DNA, and cause cancer or genetic mutations | Generally considered less harmful, but excessive exposure can cause tissue heating or skin damage |
Types of radioactive wastes are low-level radioactive wastes (LLW), which include civilian applications of radionuclides in medicine, research and industry, materials from decommissioned reactors, and protective clothing worn by persons working with radioactive materials or in nuclear establishments; and high-level radioactive wastes (HLW), resulting from spent nuclear fuel rods and obsolete nuclear weapons. The impact of ionizing radiation is highly damaging to living organisms: it can cause chemical changes by breaking chemical bonds and damaging living tissues. Short-term effects are burns, impaired metabolism, dead tissues and death of the organisms. Long-term effects are mutations increasing the incidence of tumours and cancer, shortening of lifespan and developmental changes. It is lethal at high doses, but at lower doses it creates various disorders, the most frequent of all being cancer. Biological damage may be somatic damage or radiation sickness, damage to cells not associated with reproduction, which only impacts the individual, or genetic damage, damage to cells associated with reproduction, which can subsequently cause genetic damage from gene mutation resulting in abnormalities.
Measures to control radioactive pollution include global measures such as national regulatory frameworks, waste management practices like deep geological disposal and engineered containment facilities, along with radiation monitoring networks. India's efforts include the Atomic Energy Regulatory Board (AERB), which regulates and monitors nuclear and radiation-related activities to ensure safety and prevent radioactive pollution, and environmental monitoring and nuclear waste management strategies that ensure safe handling and disposal of radioactive waste.
Electronic waste (e-waste)
Electronic waste, asked in UPSC 2013, is the discarded and end-of-life Electrical and Electronic Equipment (EEE) and products ranging from computers, equipment, home appliances, audio and video products and all of their peripherals. It is not hazardous if it is stocked in safe storage or recycled by scientific methods, or transported from one place to the other in parts or totality in the formal sector. But if recycled or disposed of unscientifically it may prove to be fatal. India witnessed a surge in e-waste generation over the past five years, rising from 1.01 million metric tonnes (MT) in 2019-20 to 1.751 million MT in 2023-24. In India, only 32.9 percent of the e-waste out of the total 1.6 MMT generated in 2022-23 was collected, dismantled, and recycled or disposed of.
Major e-waste component | Environmental hazard |
|---|---|
Cathode Ray Tubes (used in TVs, computer monitors) | Cadmium, lead, barium and nickel leach into the groundwater |
Printed Circuit Board (PCB) and switches | Atmospheric release and discharge into rivers of tin, lead, brominated dioxin, cadmium and mercury due to desoldering or open burning |
Batteries | Cadmium, lead, lithium, mercury, nickel, etc., depending upon the type of batteries |
E-waste pollutant | Source | Health effect |
|---|---|---|
Toners | Found in the plastic printer cartridge containing black and colour toners | Respiratory tract irritant; black carbon is a carcinogen |
PVC | Plastics, cables, computer housings and mouldings, chlorinated PVC (chloro-benzenes) | Dioxins produced on burning are endocrine disrupters |
Phthalates | Used to soften plastics, especially PVC | Toxic to reproduction |
Phosphor additives | The phosphor coating on cathode ray tubes contains toxic heavy metals such as cadmium, and other rare earth metals, for example zinc and vanadium as additives | Toxic heavy metal exposure |
Lithium | PVC stabilisers, lasers, LEDs, thermoelectric elements, circuit boards; lithium-ion batteries contain metals such as cobalt, nickel and manganese | Toxic metals |
Acid | Sulphuric and hydrochloric acids are used to separate metals from circuit boards | Fumes contain corrosive chlorine and sulphur dioxide, which cause respiratory problems |
Plastics | Found in circuit boards, cabinets and cables | Contain carcinogens |
BFR (Brominated Flame Retardants) | Used in circuit boards (plastic), cables and PVC cables | Give out carcinogenic brominated dioxins and furans; highly resistant to degradation; accumulate in humans and animals (UPSC 2014) |
PCB (Polychlorinated Biphenyls) | Used in transformers, capacitors, as softening agents for paint and plastics | Persistent toxic pollutant |
Selenium | Photoelectric cells, pigments, photocopiers, fax machines | Toxic exposure |
Silver | Capacitors, switches (contacts), batteries, resistors | Toxic exposure |
Measures to tackle e-waste: the E-waste Coalition 2018 is a non-binding Letter of Intent signed by seven organisations from the United Nations system, active in addressing the global e-waste challenge. The Government of India passed the first law on e-waste management in 2011, based on Extended Producer Responsibility (EPR), and the E-Waste Management Rules, 2016 replaced the 2011 rules (asked in UPSC 2019). Their salient features are: over 21 products, including Compact Fluorescent Lamp (CFL) and mercury-containing lamps, were included under the purview of the rules; EPR was strengthened by introducing manufacturers, dealers, refurbishers and Producer Responsibility Organisations (PRO) as additional stakeholders; manufacturers must take back their sold products with recommended mechanisms, collect e-waste generated during the manufacture of any EEE and channelise it for recycling or disposal, and seek authorisation from the SPCB; the CPCB conducts random sampling of EEE placed on the market to monitor compliance with the law on Restriction of Hazardous Substances (RoHS), and the producer bears the cost of sampling; liability for damages caused due to improper management of e-waste was introduced, including provision for levying financial penalty for violation of the rules; and on finance, an option was given for setting up e-waste exchange, e-retailer and Deposit Refund Scheme as an additional channel for implementing EPR by producers, with the e-waste exchange provided as an independent market instrument offering assistance for selling and purchasing e-waste generated from end-of-life EEE between agencies or organisations.
The rules were further amended in 2019 and 2022. The 2019 amendment aimed to channelise e-waste towards authorised dismantlers and recyclers to formalise the e-waste recycling sector, and the collection targets under EPR were revised, with targets introduced for new producers who started sales operations recently. The E-Waste Management Rules, 2022 widen the coverage of electronic goods from 21 to 106 and restrict the use of hazardous substances such as lead, mercury and cadmium in manufacturing EEE that have an adverse impact on human health and the environment. Under the 2022 rules, EPR certificates, similar to carbon credits, allow the offsetting of e-waste responsibility to a third party; targets require producers of electronic goods to ensure at least 60 percent of their e-waste is collected and recycled by 2023, with targets increasing to 70 percent and 80 percent in 2024 and 2025 respectively; environmental compensation is provided by companies that do not meet their target; State Governments will earmark industrial space for e-waste dismantling and recycling facilities, undertake industrial skill development and establish measures for protecting the health and safety of workers; manufacturers must make the end product recyclable and a component made by different manufacturers compatible with each other; and the CPCB conducts random sampling of EEE placed on the market to monitor and verify compliance with reduction of hazardous substances provisions.
The E-Waste (Third Amendment) Rules, 2024 expand the e-waste definition so more products fall under electronic and electrical waste; on EPR, the Central Government may establish platforms for trading EPR certificates as per guidelines issued by the Central Pollution Control Board with its approval; the CPCB will set the price range for EPR certificates at 100 percent (maximum) and 30 percent (minimum) of the environmental compensation for non-compliance; registration requirements are strengthened so e-waste producers and recyclers need to register with authorities; reporting obligations are enhanced on e-waste management activities for producers; and monitoring mechanisms have stricter guidelines for monitoring compliance and penalties.
Heavy metal pollution
Heavy metals are metallic elements with a relatively high density compared to water. They are harmful, toxic or poisonous, to the environment, humans and other organisms, even at low concentrations (asked in UPSC 2013). These toxic heavy metals entering the environment may lead to bioaccumulation and biomagnification. Water-soluble heavy metals include arsenic, cadmium, lead, mercury, barium, chromium, platinum, palladium and silver. Most of them are not broken down by biological degradation; they bioaccumulate and biomagnify, posing danger to organisms at the top of the food chain. Heavy metal poisoning (toxicity) results from exposure to heavy metals which enter the human body systems and bind to cells, preventing the normal functioning of organs; it can cause irreversible damage and can be life-threatening in some cases. Heavy metals can be carried far away from their source by winds when they are emitted in gaseous form or as fine particulates, and rain ultimately washes the air having metallic pollutants and brings them to the land and water bodies.
Metal | Sources | Health effects |
|---|---|---|
Lead | Major sources: mining, lead-acid batteries, battery recycling, paints, pigments, fly ash, plastic toys. Minor sources: lead-soldered food cans, lead pipes (water), leaded petrol (phased out), glass, ayurvedic medicines, cosmetics. E-waste sources: lead batteries, solar panels, PCBs, PVC, transistors, glass panels, computer monitor gaskets | Carcinogen (lungs, kidneys); neurological damage in children; developmental issues, miscarriages, stillbirths; lead poisoning: neurodegenerative diseases, CNS dysfunction; maternal exposure: developmental reprogramming, risk of Alzheimer's |
Mercury | Natural: volcanic eruptions, fossil fuels, metal ores. Human-made: mining, coal burning, cement, caustic soda production. E-waste sources: LCD screens, CFLs, CRTs, batteries, thermometers, medical equipment, lamps, mobile phones | Damages CNS, lungs, kidneys; causes paralysis, Alzheimer's, depression and impotence; inhalation is more harmful as it quickly reaches the brain |
Chromium | Chromium 6 (hexavalent chromium) is used as a corrosion protector of untreated and galvanised steel plates, metal housings and plates in computers, in chrome tanning (leather industry), and as a decorative or hardener for steel housings plastics (including PVCs) | Inhaling chromium or chromium 6 can damage the liver and kidneys and cause bronchial maladies, including asthmatic bronchitis and lung cancer; chromium VI can cause damage to DNA |
Cadmium | Major sources: mining (especially of zinc and copper), metallurgical operations, electroplating industries. E-waste sources: solar panels, batteries, PCBs, CRTs, SMT chips, semiconductor chips, PVC cables | Hypertension, liver and kidney damage, lung cancer, Itai-itai disease (from cadmium in water or rice) |
Arsenic | Copper, iron and silver ores, fly ash, liquid effluents from fertiliser plants, semiconductors, diodes, microwaves, LEDs, solar cells | Accumulation of arsenic in body parts like blood, nails and hairs, causing skin lesions, rough skin, dry and thickening of the skin and ultimately skin cancer |
Antimony | Trace component of metal solders, lead alloys for batteries, lead, copper and tin alloys for bearings | Antimony trioxide is a possible carcinogen |
Tin | Preserved foods stored in tin cans | Irritant, and excess tin can cause damage to the liver and kidneys |
Zinc | Mining, metal smelting (like zinc, lead and cadmium), fly ash, steel, brass, alloys, disposable and rechargeable batteries, luminous substances | Excess zinc is a skin irritant and affects the pulmonary system |
Barium | Oil and gas industries (used to make drilling mud which simplifies drilling through rocks by lubricating the drill), paint, tiles, fireworks (barium nitrate and chlorate for green colour) | Nausea, brain swelling, muscle weakness, irregular heartbeat, paralysis |
Beryllium | PCB motherboards (copper-beryllium alloy is used to strengthen connectors while maintaining electrical conductivity) | Lung cancer and lung damage, poor wound healing |
The Minamata Convention takes its name from Japan, where mass mercury poisoning (Minamata disease) was observed in the 1960s, caused by eating fish from Minamata Bay contaminated with methylmercury. Its aim is to protect the environment and human health from anthropogenic emissions and releases of the toxic heavy metal mercury. India ratified the Minamata Convention in 2018.
Industrial pollution
Aspect | Highly Polluting Industries (HPIs) | Grossly Polluting Industries (GPIs) | Water guzzlers |
|---|---|---|---|
Definition | Industries closely monitored by MoEFCC for high pollution | Industries discharging more than 100 kiloliters per day wastewater or using hazardous chemicals as per 1989 rules | Industries with high water consumption |
Examples | Iron and steel, thermal power, sugar, cement, copper smelter, distillery, pharmaceuticals, tannery, refinery, caustic soda, pulp and paper, dye and dye stuff | Fertilizers, pharmaceuticals, distilleries, textiles, slaughterhouses, food and beverage, automobile industry | Thermal power plants, engineering, paper and pulp, textiles, sugar, cement |
Details | 17 categories identified as HPIs | Defined under Environment (Protection) Act, 1986 | India is home to almost 18 percent of world population and has only 4 percent of global fresh water resources; much of this water is used in agriculture (FAO puts this figure at 90 percent, Indian Central Water Commission says 78 percent) |
Industrial emissions and effluents monitoring: every industry and its effluent treatment plant (ETP) outlets are connected to a central monitoring system that continuously reads and sends data to the SPCB or CPCB (regulator). Since 2014, monitoring has been done through the Online Continuous Emissions and Effluents Monitoring Systems (OCEMS), and all HPIs are required to have OCEMS. Five parameters are scrutinised for all industries: BOD (Biological Oxygen Demand), TDS (Total Dissolved Solids), pH value, COD (Chemical Oxygen Demand) and TSS (Total Suspended Solids). The emissions monitored are particulate matter (PM), carbon monoxide (CO), nitrogen oxides (NOx), sulphur dioxide (SO2) and fluoride. If the pollution control boards receive any number that exceeds the permissible limit, the industry is sent a notice and action is taken.
Thermal power plants (TPP), asked in UPSC 2011 and 2020: most TPPs in India operate with low efficiency (20-45 percent) and lack pollution-reducing technologies like flue gas desulphurisation (FGD) and electrostatic precipitators, and Indian coal has high ash content, exacerbating pollution issues. The major pollutant is fly ash, a byproduct of coal combustion discharged into the air and ash ponds; its collapse contaminates nearby farms, homes, surface water and groundwater with toxic heavy metals and other pollutants. Toxic heavy metals in fly ash include mercury, cadmium, arsenic, lead and zinc, polluting air and water bodies around TPPs, and other pollutants in fly ash include toxic elements like fluoride and sulphur. Gaseous pollutants from TPPs include CO2, SO2, NOx, particulate matter (PM), methane (CH4), carbon monoxide (CO) and volatile organic compounds (VOCs). Water pollution from TPPs comes through heavy metal pollution from acid mine drainage (AMD) from coal mines and effluents from cooling towers, ash handling and wet FGD discharges.
The iron and steel industry, asked in UPSC 2014: unwanted impurities are removed by smelting iron ore in a blast furnace; major impurities are sulphur, lead and oxygen. In a blast furnace, fuel (coke, which has far fewer impurities than coal), iron ore and flux (limestone, which removes sulphur and other impurities into slag) are continuously supplied. Byproducts are liquid slag, liquid iron or pig iron, and gases (CO and CO2). Slag is full of impurities such as calcium sulphide (CaS) and oxides of silica, alumina, magnesia and calcium (CaO); only a small percentage of slag goes into landfills. Cement made with blast furnace slag has lower permeability and is more durable than Portland (regular) cement, and slag is used as an aggregate in concrete, cement clinker, asphalt concrete, asphalt and road bases. The cement industry contributes more than 5 percent of global carbon dioxide emissions: cement is made by mixing limestone with silica-rich clay, and during clinker production limestone is heated and converted into lime, releasing significant amounts of CO2. Dissolution of slag generates alkalinity that can be used to precipitate out metals, sulfates and excess nutrients like nitrogen, phosphorus and potassium in wastewater treatment, and ferrous slags have been used to rebalance soil pH and as fertilisers, as sources of calcium and magnesium.
Air pollution from iron and steel comes from burning coal in the form of PM2.5 and PM10, carbon dioxide, sulphur oxides (sulphur is eliminated as SO2 in the blast furnace), nitrogen oxides, carbon monoxide, hydrogen sulphide, non-methane volatile organic compounds (NMVOC) and other pollutants, and coke ovens emit naphthalene, which is highly toxic and can cause cancer. Magnetite pollution, asked in UPSC 2021, is the presence of a magnetic mineral called magnetite (Fe3O4) in the environment as a result of human activities such as mining, steel production and industrial processes; magnetic particles can interfere with the migratory patterns of birds and the operation of electronic equipment such as compasses and navigation systems. Water pollution in the industry comes from heavy metal pollution due to acid mine drainage (AMD) in slag dumps; wastewater from the coking process, heating coal in the absence of oxygen to drive off VOCs, leaving behind high carbon coke, is highly toxic and contains several carcinogenic organic compounds as well as cyanide, sulfides and ammonia; and dissolution of slags (full of oxides) can produce highly alkaline groundwater.
The cement industry involves blasting limestone quarries, crushing, calcination and grinding to form Portland cement. Limestone, the most common form of calcium carbonate, is the most important binder in cement; it is heated in kilns to about 1,400 degrees C using coal as fuel. Carbon trapped in the limestone combines with oxygen and is released as CO2 (byproduct). A portion of limestone can be substituted by blast furnace slag or fly ash to reduce CO2 emissions. Emissions and effluents are the same as in thermal power plants, since coal is the primary fuel source in kilns.
The copper smelting industry: in electrolytic refining, copper from the anode plates is electrolytically deposited on the stainless steel cathode plate, resulting in copper with a grade of 99.99 percent. The byproduct slime generated in electrolytic refining contains precious metals such as gold, silver, selenium and tellurium, recovered in a slime treatment plant. Copper slag is mainly used for abrasive surface blast-cleaning (used to shape the surface of metal, stone, concrete and other materials) and can be used in road construction and the production of cement, mortar and concrete as raw materials for clinker and coarse and fine aggregates. Pollutants include leaching of impurities from copper ore concentrate and slag, which releases radon, iron, arsenic, antimony, mercury, lead, cadmium, selenium, magnesium, aluminium, cobalt, tin, nickel, manganese, nitrates and fluorides (asked in UPSC 2021). As most copper ores are sulphur-based, the smelting process releases sulphur dioxide; when the concentration of sulphur dioxide is too high, industries convert it into sulphuric acid, an irritant and water contaminant.
The zinc and lead smelting industry: zinc protects steel from corrosion (galvanisation) and lead is used in batteries; zinc and lead often occur together as sulphides. Raw materials are zinc sulfide (ZnS) and lead sulphide (PbS, galena) ore concentrate. Processes involved are beneficiation (concentration of the zinc or lead in the recovered ore, done near the mine), roasting, leaching, purification and electrowinning (a specialised electrolysis process). Byproducts gold, silver and copper are collected as slimes. Granulated lead-zinc slag has suitable particle sizes for sand replacement in mortar and concrete. Principal air pollutants are particulate matter (lead, zinc, arsenic, antimony, cadmium, copper and mercury and metallic sulfates) and sulphur dioxide (SO2). Sources of wastewater are spent electrolytic baths, slime recovery, spent acid from hydrometallurgy processes, cooling water and air scrubbers. Heavy metal leaching from discarded slag includes cadmium, copper, lead, iron, bismuth, antimony and arsenic.
The aluminium smelting industry: the Bayer process separates alumina (aluminium oxide) from bauxite ore near the mine, and the insoluble parts of the bauxite are removed by exposing the ore to very hot caustic soda (sodium hydroxide). The Hall-Heroult process produces pure aluminium by electrolysis of alumina in an aluminium smelter; due to the significant energy demand, smelters must be set up close to a power station. The byproduct red mud is the highly alkaline and hazardous bauxite residue from the Bayer process, composed mainly of iron oxides and various other oxides and heavy metals. In the past red mud was disposed of entirely in landfills, but now it is used in road construction, as a source of iron, in producing iron-rich cements and low-cost concrete, applied to soils to improve phosphorus cycling, amelioration of soil acidity and carbon sequestration. Pollutants are mostly related to thermal power and the electrolysis process: NOx, SO2, ammonia (NH3) and polycyclic aromatic hydrocarbons (PAH, formed from incomplete combustion during electrolysis).
Petroleum refining and petrochemicals: the petroleum industry is subdivided into upstream, midstream and downstream segments; upstream deals with exploration and mining of crude oil, midstream includes storage and transport of crude, while downstream involves refining. Petroleum refining involves fractional distillation (separation of different fractions, hydrocarbon compounds, of crude oil based on their boiling point differences), conversion processes (breaking down long chain molecules into more valuable smaller ones by heating), and treating (separating impurities such as sulfur, nitrogen and heavy metals). Air pollution from refining includes particulate matter (PM), carbon dioxide (CO2), nitrogen oxides (NOx), carbon monoxide (CO), hydrogen sulfide (H2S), sulphur dioxide (SO2), natural gas (methane), lead, VOCs including cancer-causing benzene pollutants, and other pollutants. Water pollution: refineries use deep-injection into underground wells and coastal waters to dispose of wastewater and oil residues generated inside the plants, and some of these wastes end up in aquifers and groundwater. The petrochemical industry comprises the manufacture of synthetic fibres, polymers (PVC, polystyrene, performance polymers) and intermediates (styrene), synthetic rubber (elastomers), synthetic detergent intermediates and performance plastics, using hydrocarbon feedstock (naphtha, ethylene, propylene, butadiene) derived mainly from crude oil and natural gas processing. Its organic pollutants are complex polycyclic aromatic hydrocarbons (PAHs), and its wastewater effluents are toxic phenols, cyanide and formaldehyde.
Furnace oil, asked in UPSC 2021, is a product of oil refineries; some industries use it to generate power, and its use causes sulphur emissions into the environment. The fertiliser industry emits air pollutants such as particulate matter, ammonia (NH3), nitrogen oxides, sulphur and carbon dioxide, and prilling towers, which manufacture urea prills, are a significant source of urea dust particulates. Its wastewater contains ammoniacal nitrogen, phosphates, heavy metals (vanadium and arsenic, used for carbon dioxide removal in the ammonia plant, and chromium, used as a corrosion inhibitor in cooling towers) and fluorides in varied amounts.
Distilleries use sugarcane molasses, cereals, fruits, sugar beet and other agro products for producing alcohol through fermentation and distillation. Alcohol is an essential material in the chemical, pharmaceutical, cosmetics, beverage, food and perfume industries. Water pollution from distilleries is the discharge of high-strength liquid effluents with high concentrations of organic matter (high BOD) and nitrogen compounds (eutrophication), low pH, high temperature, high turbidity and high salinity. The paper and pulp industry: pulp is fibrous material prepared by separating cellulose fibres from wood, bagasse, fibre crops, waste paper and other sources. Pulp mills are energy intensive and use a lot of unpolluted water and chemicals (sulfite salts, caustic soda, sodium sulfide, hydrogen peroxide, sulphonic acid) for pulping the wood to remove lignin and bleaching the pulp for producing paper of various quality and finish. Wastewater pollution includes complex organic (high BOD) and inorganic pollutants such as sodium hydroxide, sodium carbonate, sodium sulfide, chlorine dioxide, calcium oxide and hydrochloric acid. Air pollution includes gaseous pollutants such as hydrogen sulfides, sodium sulfide, methyl mercaptan, sulfur and other gases.
Caustic soda is produced by electrolysis of brine, common salt dissolved in water, in the chloralkali process, using the mercury cell and membrane cell processes. It is a widely used industrial chemical in pulp and paper, detergents, packaging, agriculture, environmental protection, water treatment and textiles. Chlor-alkali industries produce caustic soda, soda ash, chlorine and hydrogen, which are used as fuel or converted to HCl; these products are used to manufacture paper, soaps and detergents, chemicals, water treatment chemicals, textiles, PVC and glass. Pollution: owing to the environmental risks associated with the mercury process and risks associated with handling chlorine, its vapours and hydrogen, the industry is classified among the 17 polluting industry categories. Wastewater is generated from drying chlorine using sulphuric acid (H2SO4), and scrapped cell parts (membranes, anodes and cathodes) leach heavy metals.
The tannery industry: beamhouse operations take hides from slaughterhouses, soaking removes dirt from hides, liming unhairs by chemical dissolution of the hair with an alkaline medium of sulphide and lime, deliming neutralises alkaline hides with acid ammonium salts, bating or puering degrades proteins, and pickling increases the acidity of the hide, enabling chromium tannins to enter the hide. Chrome tanning is based on the cross-linkage of chromium ions with free carboxyl groups in the collagen, making the hide resistant to bacteria and temperature. Pollution: the discharge of solid waste and wastewater containing chromium is the leading environmental problem; wastewater with high organic content (high BOD) emanates from the beamhouse (pre-tanning) operations; emissions into the air are primarily related to energy use and the use of organic solvents and dyes, mainly hydrogen sulphide (H2S) and ammonia (NH3).
The sugar industry involves sugar cane or sugar beet harvesting, juice extraction, filtration, crystallisation and drying of crystals into sugar. Byproducts: press mud produced during the filtration of cane juice is used as fertiliser, soil amendment (any material added to a soil to improve its physical properties, such as water retention), biosorbent (effectively adsorbs metal ions and contaminants) and animal feed; molasses, a dark viscous syrup resulting from refining sugar cane juice into sugar, is used to sweeten and flavour foods, in making brown sugar for baking, ethanol production, as animal feed and soil amendment; and bagasse, a dry pulpy fibrous material that remains after crushing sugarcane, is used as fuel in sugar industries and as raw material in the paper, pulp and packaging industry. Air pollution includes fly ash, sulphur dioxide, carbon monoxide, nitrogen oxides, nitrates, carbon compounds and sulfates; sulphitation (introduction of SO2 into liquids) and carbonation (saturation of a liquid with CO2 gas) are used in purification (lightening) of cane juice by employing sulphur dioxide, carbon dioxide, lime (calcium hydroxide) and calcium carbonate (which aids precipitation of impurities), producing SO2 and CO2. Greenhouse gases: sugarcane residue burning results in not only CO2, N2O (nitrous oxide) and methane emissions but also other GHG precursors including carbon monoxide (CO) and non-methane volatile organic compounds (NMVOC). The industry is water intensive: to mature in the field, one kilo of sugarcane requires 1,500-2,000 litres of water, and after the harvest, crushing a single tonne of sugarcane requires another 1,500-2,000 litres of water, generating about 1,000 litres of wastewater. Water pollution: the wastewater contains a high amount of organic pollution load, particularly in suspended solids, organic matter, press mud and bagasse, raising the Biological Oxygen Demand; coliform bacteria, an indicator species for pollution load, indicates a high presence of pathogens; and total dissolved solids (TDS, inorganic salts such as calcium, magnesium, sodium and nitrates) are found in sugar industry effluents.
Key Terms
Water (Prevention and Control of Pollution) Act, 1974: The law that created the pollution control boards and regulates discharge of pollutants into water.
Air (Prevention and Control of Pollution) Act, 1981: The law that empowers boards to control air pollution and declare air pollution control areas.
Central Pollution Control Board (CPCB): The apex body that sets standards, monitors air and water quality and advises governments on pollution control.
Plastic Waste Management Rules, 2016: The rules governing plastic waste, including the ban on certain single-use plastic items.
National Clean Air Programme (NCAP): The national programme aiming to cut particulate matter pollution in cities by 20 to 30 percent by 2024, later revised.
Graded Response Action Plan (GRAP): The emergency graded measures applied in Delhi-NCR when air quality worsens.
National Air Quality Index (AQI): The index that turns air quality data into a single number and colour-coded category for the public.
Extended Producer Responsibility (EPR): The rule making producers responsible for the collection and recycling of the waste their products generate.
E-waste: Discarded electronic equipment, a fast-growing waste stream rich in both valuable and hazardous materials.
smog: The mix of smoke and fog formed when pollutants react in sunlight, reducing visibility and harming health.
Prelims practice
0 of 5 answered · 0 correct
Consider the following statements: 1. Peroxyacetyl Nitrate (PAN) is a secondary pollutant formed when nitrogen oxides react with hydrocarbons under sunlight. 2. Carbon monoxide combines with haemoglobin to produce carboxyhemoglobin. 3. India has been the top emitter of sulphur dioxide in the world since 2019. Which of the statements given above are correct?
With reference to the National Clean Air Programme (NCAP), which of the following statements is correct?
Consider the following statements about water pollution measurement: 1. Dissolved oxygen below 4.0 mg per litre indicates highly polluted water. 2. BOD measures only biodegradable organic matter, while COD also covers non-biodegradable matter. 3. A higher BOD indicates high pollution and low dissolved oxygen. Which of the statements given above are correct?
Which of the following is correct about the Plastic Waste Management Rules in India?
With reference to e-waste in India, consider the following statements: 1. E-waste generation rose from 1.01 MMT in 2019-20 to 1.751 MMT in 2023-24. 2. The E-Waste Management Rules, 2022 widened coverage from 21 to 106 electronic goods. 3. Only 32.9 percent of e-waste generated in 2022-23 was collected, dismantled and recycled or disposed of. Which of the statements given above are correct?
Frequently asked questions
What is the difference between primary and secondary air pollutants?
Primary pollutants are emitted directly into the atmosphere from a source, such as sulphur dioxide from power plants. Secondary pollutants form in the atmosphere through chemical reactions involving primary pollutants, such as Peroxyacetyl Nitrate (PAN), which is created when nitrogen oxides react with hydrocarbons under sunlight, and ground-level ozone, which forms when carbon monoxide, nitrogen dioxide and volatile organic compounds react in sunlight.
What is the National Clean Air Programme and what does it target?
The National Clean Air Programme is the first national-level strategy to tackle air pollution across India, with a time-bound target of reducing PM2.5 and PM10 by 40 percent by 2026 from the 2017 level. It is executed by the Central Pollution Control Board under the Air (Prevention and Control of Pollution) Act, 1981, and covers 132 non-attainment cities, with the PRANA portal monitoring implementation.
How are BOD and COD different?
Biological Oxygen Demand is the oxygen consumed by bacteria and other microorganisms while they decompose organic matter under aerobic conditions, so it is limited to biodegradable materials. Chemical Oxygen Demand measures the oxygen required to oxidise both biodegradable and non-biodegradable organic matter and oxidisable inorganic compounds, so it gives a more comprehensive idea of the level of pollution in a water sample.
What is eutrophication and why does it matter?
Eutrophication is the over-enrichment of a water body with nutrients, mainly nitrogen and phosphorus, leading to plentiful growth of algae and plankton and eventually to anoxic conditions. It collapses food chains, invites new species, causes loss of freshwater lakes and coral reefs, and creates algal blooms and dead zones that suffocate aquatic organisms.
What did India do about single-use plastic?
Under the Plastic Waste Management Rules, 2016 and the 2021 amendment, identified single-use plastic items of low utility and high littering potential were prohibited from July 2022, including plastic cutlery, stirrers, earbud sticks and thermocol for decoration. The minimum thickness of plastic carry bags was raised from 50 microns to 75 microns in 2021 and to 120 microns in 2022, and producers must manage packaging waste through Extended Producer Responsibility.
What is the Minamata Convention?
The Minamata Convention aims to protect the environment and human health from anthropogenic emissions and releases of mercury, a toxic heavy metal. It takes its name from Minamata disease, the mass mercury poisoning observed in Japan in the 1960s from eating fish from Minamata Bay contaminated with methylmercury. India ratified the convention in 2018.